Blue gusseted cleanroom waste bag in complete three-quarter view

Pakaian Bilik Bersih, PPE dan Barangan boleh guna

Beg Sisa Bilik Bersih

Low-particle LDPE cleanroom waste bag with a gusseted base, strong single-seam construction and optional color-coded or sterile presentation.

Clean-converted LDPE liner for controlled waste collection
Gusseted base fits rectangular cleanroom bins without bulky folds
Tinted film supports visual waste-stream segregation

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The Cleanroom Waste Bag is a flexible bin liner made from clean, high-clarity low-density polyethylene. A bottom gusset opens inside rectangular containers and distributes the load more evenly than a flat pouch. Smooth film, controlled conversion and clean double packaging reduce the risk of introducing loose fibers during transfer and routine waste removal.

Ciri-ciri Utama

Virgin LDPE film provides flexibility and moisture resistance

Gusseted base expands to line square or rectangular receptacles

Smooth sealed edges avoid stitched seams and exposed fibers

Blue, clear and other controlled colors simplify waste-stream identification

Roll or flat-pack formats support different dispensing routines

Kebimbangan Produk Pelanggan

Waste liners in controlled areas must fit the receptacle, resist puncture and close without releasing collected debris. Poorly sized bags can collapse into the bin, while rough handling can drag contaminated outer surfaces through a cleaner zone.

An undersized liner can pull away from the bin rim during use.Match the flat width, gusset and length to the receptacle dimensions.

Sharp disposable items may puncture thin film.Select a heavier gauge or use a rigid sharps container where appropriate.

Overfilled bags are difficult to close without compressing waste.Set a fill limit that leaves enough clean film for secure closure.

Ambiguous liner colors can cause disposal-stream errors.Assign documented liner colors to each approved waste category.

Permohonan yang biasa

For routine collection of used wipes, disposable garments, packaging film and other approved non-sharp waste in pharmaceutical, biotechnology, semiconductor, medical-device and precision manufacturing cleanrooms.

Parameter teknikal

The ranges below cover common cleanroom LDPE bin-liner constructions. Final gauge, color, pack format and treatment should be selected for the receptacle, waste type and transfer route.

Bahan Teras	Virgin low-density polyethylene film
Ketebalan Panel	0.025-0.100 mm film gauge
Lebar berkesan	450-1000 mm flat bag width
Panjang maksimum	1200 mm bag length
Keluli Menghadapi Ketebalan	0 mm; all-polymer film construction
Ketumpatan teras	910-940 kg/m³ LDPE
Kekonduksian Terma	0.31-0.36 W/(m·K), typical LDPE range
Kemasan permukaan	Smooth clear or tinted low-particle film
Jenis Bersatu	Single sealed bottom with expanding gusset and open top
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Clear, blue and other controlled color tintsFlat pack or perforated roll formatStraight or gusseted baseLight, medium and heavy film gaugesSterile or non-sterile presentationCustom dimensions and double-bagged packing

Planning a Cleanroom Waste Bag specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami