Blue gusseted cleanroom waste bag in complete three-quarter view

클린룸 의류, PPE 및 소모품

클린룸 폐기물 가방

Low-particle LDPE cleanroom waste bag with a gusseted base, strong single-seam construction and optional color-coded or sterile presentation.

Clean-converted LDPE liner for controlled waste collection
Gusseted base fits rectangular cleanroom bins without bulky folds
Tinted film supports visual waste-stream segregation

견적 요청 제품 찾아보기

상품 소개

The Cleanroom Waste Bag is a flexible bin liner made from clean, high-clarity low-density polyethylene. A bottom gusset opens inside rectangular containers and distributes the load more evenly than a flat pouch. Smooth film, controlled conversion and clean double packaging reduce the risk of introducing loose fibers during transfer and routine waste removal.

주요 기능

Virgin LDPE film provides flexibility and moisture resistance

Gusseted base expands to line square or rectangular receptacles

Smooth sealed edges avoid stitched seams and exposed fibers

Blue, clear and other controlled colors simplify waste-stream identification

Roll or flat-pack formats support different dispensing routines

고객 제품 관심사

Waste liners in controlled areas must fit the receptacle, resist puncture and close without releasing collected debris. Poorly sized bags can collapse into the bin, while rough handling can drag contaminated outer surfaces through a cleaner zone.

An undersized liner can pull away from the bin rim during use.Match the flat width, gusset and length to the receptacle dimensions.

Sharp disposable items may puncture thin film.Select a heavier gauge or use a rigid sharps container where appropriate.

Overfilled bags are difficult to close without compressing waste.Set a fill limit that leaves enough clean film for secure closure.

Ambiguous liner colors can cause disposal-stream errors.Assign documented liner colors to each approved waste category.

일반적인 응용 프로그램

For routine collection of used wipes, disposable garments, packaging film and other approved non-sharp waste in pharmaceutical, biotechnology, semiconductor, medical-device and precision manufacturing cleanrooms.

기술 매개변수

The ranges below cover common cleanroom LDPE bin-liner constructions. Final gauge, color, pack format and treatment should be selected for the receptacle, waste type and transfer route.

핵심 재료	Virgin low-density polyethylene film
패널 두께	0.025-0.100 mm film gauge
유효 폭	450-1000 mm flat bag width
최대 길이	1200 mm bag length
강철 면면 두께	0 mm; all-polymer film construction
코어 밀도	910-940 kg/m³ LDPE
열전도도 (Thermal Conductivity)	0.31-0.36 W/(m·K), typical LDPE range
표면 마무리	Smooth clear or tinted low-particle film
접합 유형	Single sealed bottom with expanding gusset and open top
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Clear, blue and other controlled color tintsFlat pack or perforated roll formatStraight or gusseted baseLight, medium and heavy film gaugesSterile or non-sterile presentationCustom dimensions and double-bagged packing

Planning a Cleanroom Waste Bag specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.