Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Prendas de sala limpia, EPP y consumibles
Bolsa de residuos de sala limpia
Low-particle LDPE cleanroom waste bag with a gusseted base, strong single-seam construction and optional color-coded or sterile presentation.
- Clean-converted LDPE liner for controlled waste collection
- Gusseted base fits rectangular cleanroom bins without bulky folds
- Tinted film supports visual waste-stream segregation
Introducción del producto
The Cleanroom Waste Bag is a flexible bin liner made from clean, high-clarity low-density polyethylene. A bottom gusset opens inside rectangular containers and distributes the load more evenly than a flat pouch. Smooth film, controlled conversion and clean double packaging reduce the risk of introducing loose fibers during transfer and routine waste removal.
Características clave
Gusseted base expands to line square or rectangular receptacles
Smooth sealed edges avoid stitched seams and exposed fibers
Blue, clear and other controlled colors simplify waste-stream identification
Roll or flat-pack formats support different dispensing routines
Preocupaciones del producto del cliente
Waste liners in controlled areas must fit the receptacle, resist puncture and close without releasing collected debris. Poorly sized bags can collapse into the bin, while rough handling can drag contaminated outer surfaces through a cleaner zone.
An undersized liner can pull away from the bin rim during use.Match the flat width, gusset and length to the receptacle dimensions.
Sharp disposable items may puncture thin film.Select a heavier gauge or use a rigid sharps container where appropriate.
Overfilled bags are difficult to close without compressing waste.Set a fill limit that leaves enough clean film for secure closure.
Ambiguous liner colors can cause disposal-stream errors.Assign documented liner colors to each approved waste category.
Aplicaciones típicas
For routine collection of used wipes, disposable garments, packaging film and other approved non-sharp waste in pharmaceutical, biotechnology, semiconductor, medical-device and precision manufacturing cleanrooms.
Parámetros técnicos
The ranges below cover common cleanroom LDPE bin-liner constructions. Final gauge, color, pack format and treatment should be selected for the receptacle, waste type and transfer route.
| Materiales Core | Virgin low-density polyethylene film |
|---|---|
| Panel de espesor | 0.025-0.100 mm film gauge |
| Ancho efectivo | 450-1000 mm flat bag width |
| Longitud máxima | 1200 mm bag length |
| Acero frente a espesor | 0 mm; all-polymer film construction |
| Densidad Core | 910-940 kg/m³ LDPE |
| Conductividad térmica | 0.31-0.36 W/(m·K), typical LDPE range |
| Superficie acabada | Smooth clear or tinted low-particle film |
| Tipo conjunto | Single sealed bottom with expanding gusset and open top |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Clear, blue and other controlled color tintsFlat pack or perforated roll formatStraight or gusseted baseLight, medium and heavy film gaugesSterile or non-sterile presentationCustom dimensions and double-bagged packing
Planning a Cleanroom Waste Bag specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
