İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Giysileri, PPE ve Tüketim Malzemeleri
Temiz Oda Çöp Torbası
Low-particle LDPE cleanroom waste bag with a gusseted base, strong single-seam construction and optional color-coded or sterile presentation.
- Clean-converted LDPE liner for controlled waste collection
- Gusseted base fits rectangular cleanroom bins without bulky folds
- Tinted film supports visual waste-stream segregation
Ürün tanıtımı
The Cleanroom Waste Bag is a flexible bin liner made from clean, high-clarity low-density polyethylene. A bottom gusset opens inside rectangular containers and distributes the load more evenly than a flat pouch. Smooth film, controlled conversion and clean double packaging reduce the risk of introducing loose fibers during transfer and routine waste removal.
Ana Özellikler
Gusseted base expands to line square or rectangular receptacles
Smooth sealed edges avoid stitched seams and exposed fibers
Blue, clear and other controlled colors simplify waste-stream identification
Roll or flat-pack formats support different dispensing routines
Müşteri Ürün Sorunları
Waste liners in controlled areas must fit the receptacle, resist puncture and close without releasing collected debris. Poorly sized bags can collapse into the bin, while rough handling can drag contaminated outer surfaces through a cleaner zone.
An undersized liner can pull away from the bin rim during use.Match the flat width, gusset and length to the receptacle dimensions.
Sharp disposable items may puncture thin film.Select a heavier gauge or use a rigid sharps container where appropriate.
Overfilled bags are difficult to close without compressing waste.Set a fill limit that leaves enough clean film for secure closure.
Ambiguous liner colors can cause disposal-stream errors.Assign documented liner colors to each approved waste category.
Tipik uygulamalar
For routine collection of used wipes, disposable garments, packaging film and other approved non-sharp waste in pharmaceutical, biotechnology, semiconductor, medical-device and precision manufacturing cleanrooms.
Teknik parametreler
The ranges below cover common cleanroom LDPE bin-liner constructions. Final gauge, color, pack format and treatment should be selected for the receptacle, waste type and transfer route.
| Temel malzemeler | Virgin low-density polyethylene film |
|---|---|
| Panel kalınlığı | 0.025-0.100 mm film gauge |
| Effective Width (Etkili Genişlik) | 450-1000 mm flat bag width |
| Maksimum uzunluk | 1200 mm bag length |
| Çelik yüz yüze kalınlığı | 0 mm; all-polymer film construction |
| Core Density (Çekirdek Yoğunluğu) | 910-940 kg/m³ LDPE |
| Termal İletkenlik | 0.31-0.36 W/(m·K), typical LDPE range |
| Yüzey bitirme | Smooth clear or tinted low-particle film |
| Ortak tip | Single sealed bottom with expanding gusset and open top |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Clear, blue and other controlled color tintsFlat pack or perforated roll formatStraight or gusseted baseLight, medium and heavy film gaugesSterile or non-sterile presentationCustom dimensions and double-bagged packing
Planning a Cleanroom Waste Bag specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
