English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
ملابس الغرف النظيفة، PPE والمواد الاستهلاكية
زجاجة رذاذ غرفة نظيفة
Translucent HDPE cleanroom spray bottle with a white polypropylene trigger head, adjustable nozzle and full-length polyethylene dip tube.
- Adjustable trigger sprayer supports controlled surface application
- Translucent HDPE bottle keeps fill level visible
- Long dip tube reaches the base to reduce residual liquid
مقدمة المنتج
The Cleanroom Spray Bottle combines a chemical-resistant translucent bottle with a hand-operated trigger pump. A threaded polypropylene closure secures the sprayer, while the polyethylene dip tube extends toward the lowest point of the container. The adjustable front nozzle supports a directed stream or atomized spray for controlled cleaning tasks.
الخصائص الرئيسية
Adjustable nozzle changes between fine spray and focused stream
Translucent bottle permits visual monitoring of liquid level
Full-length dip tube minimizes unusable solution at the base
Smooth cylindrical body is easy to wipe before area transfer
مخاوف المنتج للعملاء
Spray consistency depends on solution viscosity, nozzle condition and seal compatibility. Misidentified refills or a poorly cleaned trigger assembly can introduce chemical or particulate contamination.
The trigger may lose prime when the dip tube is loose or too short.Match the dip-tube length to the bottle and check its connection.
Dried residue can distort the spray pattern.Flush or replace the nozzle according to the cleaning procedure.
Incompatible solutions may swell seals or embrittle the pump.Confirm pump, seal and bottle compatibility with the intended liquid.
Unlabeled bottles create a risk of using the wrong chemistry.Apply approved cleanroom labels immediately after filling.
تطبيقات نموذجية
For applying approved alcohol blends, detergents, disinfectants and high-purity water to wipes or controlled surfaces in cleanrooms, laboratories and equipment-preparation areas.
المعلمات الفنية
These ranges describe common 250-1000 mL cleanroom trigger-spray bottles. Final resin, output volume, nozzle pattern and packaging depend on the solution and cleaning protocol.
| المواد الأساسية | Natural HDPE bottle, polypropylene trigger and polyethylene dip tube |
|---|---|
| سمك اللوحة | 0.8-1.8 mm nominal bottle wall |
| العرض الفعال | 55-100 mm bottle diameter |
| الحد الأقصى الطول | 280 mm overall height with trigger |
| الصلب يواجه سمك | 0 mm; all-polymer dispensing assembly |
| الكثافة الأساسية | 940-970 kg/m³ HDPE bottle |
| الموصلية الحرارية | 0.42-0.52 W/(m·K), typical HDPE range |
| إنهاء السطح | Smooth translucent natural bottle with white trigger head |
| نوع المشترك | Threaded neck with trigger-pump closure and full-length dip tube |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
250, 500, 750 and 1000 mL capacitiesHDPE or compatible fluorinated bottleWhite, blue or color-coded triggerAdjustable spray/stream or fixed-output nozzleChemical-resistant seal setSterile, non-sterile or double-bagged supply
Planning a Cleanroom Spray Bottle specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
