Translucent cleanroom spray bottle with white trigger in complete three-quarter view

Одежда для чистых комнат, ИПП и расходные материалы

Бутылка спрея для чистой комнаты

Translucent HDPE cleanroom spray bottle with a white polypropylene trigger head, adjustable nozzle and full-length polyethylene dip tube.

Adjustable trigger sprayer supports controlled surface application
Translucent HDPE bottle keeps fill level visible
Long dip tube reaches the base to reduce residual liquid

Запрос котировки Просмотреть продукты

Введение продукции

The Cleanroom Spray Bottle combines a chemical-resistant translucent bottle with a hand-operated trigger pump. A threaded polypropylene closure secures the sprayer, while the polyethylene dip tube extends toward the lowest point of the container. The adjustable front nozzle supports a directed stream or atomized spray for controlled cleaning tasks.

Основные характеристики

Trigger lever provides one-handed gloved operation

Adjustable nozzle changes between fine spray and focused stream

Translucent bottle permits visual monitoring of liquid level

Full-length dip tube minimizes unusable solution at the base

Smooth cylindrical body is easy to wipe before area transfer

Обеспокоенность клиентов продуктами

Spray consistency depends on solution viscosity, nozzle condition and seal compatibility. Misidentified refills or a poorly cleaned trigger assembly can introduce chemical or particulate contamination.

The trigger may lose prime when the dip tube is loose or too short.Match the dip-tube length to the bottle and check its connection.

Dried residue can distort the spray pattern.Flush or replace the nozzle according to the cleaning procedure.

Incompatible solutions may swell seals or embrittle the pump.Confirm pump, seal and bottle compatibility with the intended liquid.

Unlabeled bottles create a risk of using the wrong chemistry.Apply approved cleanroom labels immediately after filling.

Типичные приложения

For applying approved alcohol blends, detergents, disinfectants and high-purity water to wipes or controlled surfaces in cleanrooms, laboratories and equipment-preparation areas.

Технические параметры

These ranges describe common 250-1000 mL cleanroom trigger-spray bottles. Final resin, output volume, nozzle pattern and packaging depend on the solution and cleaning protocol.

Основной материал	Natural HDPE bottle, polypropylene trigger and polyethylene dip tube
Толщина панели	0.8-1.8 mm nominal bottle wall
эффективная ширина	55-100 mm bottle diameter
Максимальная длина	280 mm overall height with trigger
Толщина линий стали	0 mm; all-polymer dispensing assembly
Плотность ядра	940-970 kg/m³ HDPE bottle
Теплопроводимость	0.42-0.52 W/(m·K), typical HDPE range
Поверхностная отделка	Smooth translucent natural bottle with white trigger head
Объединенный тип	Threaded neck with trigger-pump closure and full-length dip tube
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

250, 500, 750 and 1000 mL capacitiesHDPE or compatible fluorinated bottleWhite, blue or color-coded triggerAdjustable spray/stream or fixed-output nozzleChemical-resistant seal setSterile, non-sterile or double-bagged supply

Planning a Cleanroom Spray Bottle specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой