Translucent cleanroom spray bottle with white trigger in complete three-quarter view

クリーンルーム衣料品、 PPE 、消耗品

クリーンルームスプレーボトル

Translucent HDPE cleanroom spray bottle with a white polypropylene trigger head, adjustable nozzle and full-length polyethylene dip tube.

Adjustable trigger sprayer supports controlled surface application
Translucent HDPE bottle keeps fill level visible
Long dip tube reaches the base to reduce residual liquid

見積もりリクエスト製品案内

商品紹介

The Cleanroom Spray Bottle combines a chemical-resistant translucent bottle with a hand-operated trigger pump. A threaded polypropylene closure secures the sprayer, while the polyethylene dip tube extends toward the lowest point of the container. The adjustable front nozzle supports a directed stream or atomized spray for controlled cleaning tasks.

主要な特徴

Trigger lever provides one-handed gloved operation

Adjustable nozzle changes between fine spray and focused stream

Translucent bottle permits visual monitoring of liquid level

Full-length dip tube minimizes unusable solution at the base

Smooth cylindrical body is easy to wipe before area transfer

お客様の製品に関する懸念事項

Spray consistency depends on solution viscosity, nozzle condition and seal compatibility. Misidentified refills or a poorly cleaned trigger assembly can introduce chemical or particulate contamination.

The trigger may lose prime when the dip tube is loose or too short.Match the dip-tube length to the bottle and check its connection.

Dried residue can distort the spray pattern.Flush or replace the nozzle according to the cleaning procedure.

Incompatible solutions may swell seals or embrittle the pump.Confirm pump, seal and bottle compatibility with the intended liquid.

Unlabeled bottles create a risk of using the wrong chemistry.Apply approved cleanroom labels immediately after filling.

典型的な用途

For applying approved alcohol blends, detergents, disinfectants and high-purity water to wipes or controlled surfaces in cleanrooms, laboratories and equipment-preparation areas.

技術的なパラメータ

These ranges describe common 250-1000 mL cleanroom trigger-spray bottles. Final resin, output volume, nozzle pattern and packaging depend on the solution and cleaning protocol.

コア材料	Natural HDPE bottle, polypropylene trigger and polyethylene dip tube
パネルの厚さ	0.8-1.8 mm nominal bottle wall
有効幅	55-100 mm bottle diameter
最大長さ	280 mm overall height with trigger
鋼鉄の厚さを直面する	0 mm; all-polymer dispensing assembly
コア密度	940-970 kg/m³ HDPE bottle
熱伝導率	0.42-0.52 W/(m·K), typical HDPE range
表面仕上げ	Smooth translucent natural bottle with white trigger head
ジョイントタイプ	Threaded neck with trigger-pump closure and full-length dip tube
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

250, 500, 750 and 1000 mL capacitiesHDPE or compatible fluorinated bottleWhite, blue or color-coded triggerAdjustable spray/stream or fixed-output nozzleChemical-resistant seal setSterile, non-sterile or double-bagged supply

Planning a Cleanroom Spray Bottle specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する