Translucent cleanroom spray bottle with white trigger in complete three-quarter view

클린룸 의류, PPE 및 소모품

Cleanroom Spray Bottle (클린룸 스프레이 병)

Translucent HDPE cleanroom spray bottle with a white polypropylene trigger head, adjustable nozzle and full-length polyethylene dip tube.

Adjustable trigger sprayer supports controlled surface application
Translucent HDPE bottle keeps fill level visible
Long dip tube reaches the base to reduce residual liquid

견적 요청 제품 찾아보기

상품 소개

The Cleanroom Spray Bottle combines a chemical-resistant translucent bottle with a hand-operated trigger pump. A threaded polypropylene closure secures the sprayer, while the polyethylene dip tube extends toward the lowest point of the container. The adjustable front nozzle supports a directed stream or atomized spray for controlled cleaning tasks.

주요 기능

Trigger lever provides one-handed gloved operation

Adjustable nozzle changes between fine spray and focused stream

Translucent bottle permits visual monitoring of liquid level

Full-length dip tube minimizes unusable solution at the base

Smooth cylindrical body is easy to wipe before area transfer

고객 제품 관심사

Spray consistency depends on solution viscosity, nozzle condition and seal compatibility. Misidentified refills or a poorly cleaned trigger assembly can introduce chemical or particulate contamination.

The trigger may lose prime when the dip tube is loose or too short.Match the dip-tube length to the bottle and check its connection.

Dried residue can distort the spray pattern.Flush or replace the nozzle according to the cleaning procedure.

Incompatible solutions may swell seals or embrittle the pump.Confirm pump, seal and bottle compatibility with the intended liquid.

Unlabeled bottles create a risk of using the wrong chemistry.Apply approved cleanroom labels immediately after filling.

일반적인 응용 프로그램

For applying approved alcohol blends, detergents, disinfectants and high-purity water to wipes or controlled surfaces in cleanrooms, laboratories and equipment-preparation areas.

기술 매개변수

These ranges describe common 250-1000 mL cleanroom trigger-spray bottles. Final resin, output volume, nozzle pattern and packaging depend on the solution and cleaning protocol.

핵심 재료	Natural HDPE bottle, polypropylene trigger and polyethylene dip tube
패널 두께	0.8-1.8 mm nominal bottle wall
유효 폭	55-100 mm bottle diameter
최대 길이	280 mm overall height with trigger
강철 면면 두께	0 mm; all-polymer dispensing assembly
코어 밀도	940-970 kg/m³ HDPE bottle
열전도도 (Thermal Conductivity)	0.42-0.52 W/(m·K), typical HDPE range
표면 마무리	Smooth translucent natural bottle with white trigger head
접합 유형	Threaded neck with trigger-pump closure and full-length dip tube
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

250, 500, 750 and 1000 mL capacitiesHDPE or compatible fluorinated bottleWhite, blue or color-coded triggerAdjustable spray/stream or fixed-output nozzleChemical-resistant seal setSterile, non-sterile or double-bagged supply

Planning a Cleanroom Spray Bottle specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.