Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Prendas de sala limpia, EPP y consumibles
Botella de spray de sala limpia
Translucent HDPE cleanroom spray bottle with a white polypropylene trigger head, adjustable nozzle and full-length polyethylene dip tube.
- Adjustable trigger sprayer supports controlled surface application
- Translucent HDPE bottle keeps fill level visible
- Long dip tube reaches the base to reduce residual liquid
Introducción del producto
The Cleanroom Spray Bottle combines a chemical-resistant translucent bottle with a hand-operated trigger pump. A threaded polypropylene closure secures the sprayer, while the polyethylene dip tube extends toward the lowest point of the container. The adjustable front nozzle supports a directed stream or atomized spray for controlled cleaning tasks.
Características clave
Adjustable nozzle changes between fine spray and focused stream
Translucent bottle permits visual monitoring of liquid level
Full-length dip tube minimizes unusable solution at the base
Smooth cylindrical body is easy to wipe before area transfer
Preocupaciones del producto del cliente
Spray consistency depends on solution viscosity, nozzle condition and seal compatibility. Misidentified refills or a poorly cleaned trigger assembly can introduce chemical or particulate contamination.
The trigger may lose prime when the dip tube is loose or too short.Match the dip-tube length to the bottle and check its connection.
Dried residue can distort the spray pattern.Flush or replace the nozzle according to the cleaning procedure.
Incompatible solutions may swell seals or embrittle the pump.Confirm pump, seal and bottle compatibility with the intended liquid.
Unlabeled bottles create a risk of using the wrong chemistry.Apply approved cleanroom labels immediately after filling.
Aplicaciones típicas
For applying approved alcohol blends, detergents, disinfectants and high-purity water to wipes or controlled surfaces in cleanrooms, laboratories and equipment-preparation areas.
Parámetros técnicos
These ranges describe common 250-1000 mL cleanroom trigger-spray bottles. Final resin, output volume, nozzle pattern and packaging depend on the solution and cleaning protocol.
| Materiales Core | Natural HDPE bottle, polypropylene trigger and polyethylene dip tube |
|---|---|
| Panel de espesor | 0.8-1.8 mm nominal bottle wall |
| Ancho efectivo | 55-100 mm bottle diameter |
| Longitud máxima | 280 mm overall height with trigger |
| Acero frente a espesor | 0 mm; all-polymer dispensing assembly |
| Densidad Core | 940-970 kg/m³ HDPE bottle |
| Conductividad térmica | 0.42-0.52 W/(m·K), typical HDPE range |
| Superficie acabada | Smooth translucent natural bottle with white trigger head |
| Tipo conjunto | Threaded neck with trigger-pump closure and full-length dip tube |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
250, 500, 750 and 1000 mL capacitiesHDPE or compatible fluorinated bottleWhite, blue or color-coded triggerAdjustable spray/stream or fixed-output nozzleChemical-resistant seal setSterile, non-sterile or double-bagged supply
Planning a Cleanroom Spray Bottle specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
