Translucent cleanroom spray bottle with white trigger in complete three-quarter view

Pakaian Bilik Bersih, PPE dan Barangan boleh guna

Botol semburan bilik bersih

Translucent HDPE cleanroom spray bottle with a white polypropylene trigger head, adjustable nozzle and full-length polyethylene dip tube.

Adjustable trigger sprayer supports controlled surface application
Translucent HDPE bottle keeps fill level visible
Long dip tube reaches the base to reduce residual liquid

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The Cleanroom Spray Bottle combines a chemical-resistant translucent bottle with a hand-operated trigger pump. A threaded polypropylene closure secures the sprayer, while the polyethylene dip tube extends toward the lowest point of the container. The adjustable front nozzle supports a directed stream or atomized spray for controlled cleaning tasks.

Ciri-ciri Utama

Trigger lever provides one-handed gloved operation

Adjustable nozzle changes between fine spray and focused stream

Translucent bottle permits visual monitoring of liquid level

Full-length dip tube minimizes unusable solution at the base

Smooth cylindrical body is easy to wipe before area transfer

Kebimbangan Produk Pelanggan

Spray consistency depends on solution viscosity, nozzle condition and seal compatibility. Misidentified refills or a poorly cleaned trigger assembly can introduce chemical or particulate contamination.

The trigger may lose prime when the dip tube is loose or too short.Match the dip-tube length to the bottle and check its connection.

Dried residue can distort the spray pattern.Flush or replace the nozzle according to the cleaning procedure.

Incompatible solutions may swell seals or embrittle the pump.Confirm pump, seal and bottle compatibility with the intended liquid.

Unlabeled bottles create a risk of using the wrong chemistry.Apply approved cleanroom labels immediately after filling.

Permohonan yang biasa

For applying approved alcohol blends, detergents, disinfectants and high-purity water to wipes or controlled surfaces in cleanrooms, laboratories and equipment-preparation areas.

Parameter teknikal

These ranges describe common 250-1000 mL cleanroom trigger-spray bottles. Final resin, output volume, nozzle pattern and packaging depend on the solution and cleaning protocol.

Bahan Teras	Natural HDPE bottle, polypropylene trigger and polyethylene dip tube
Ketebalan Panel	0.8-1.8 mm nominal bottle wall
Lebar berkesan	55-100 mm bottle diameter
Panjang maksimum	280 mm overall height with trigger
Keluli Menghadapi Ketebalan	0 mm; all-polymer dispensing assembly
Ketumpatan teras	940-970 kg/m³ HDPE bottle
Kekonduksian Terma	0.42-0.52 W/(m·K), typical HDPE range
Kemasan permukaan	Smooth translucent natural bottle with white trigger head
Jenis Bersatu	Threaded neck with trigger-pump closure and full-length dip tube
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

250, 500, 750 and 1000 mL capacitiesHDPE or compatible fluorinated bottleWhite, blue or color-coded triggerAdjustable spray/stream or fixed-output nozzleChemical-resistant seal setSterile, non-sterile or double-bagged supply

Planning a Cleanroom Spray Bottle specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami