English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات الصرف الصحي والنظافة والسلامة في الغرف النظيفة
نظيف وكيل نظام مكافحة الحريق
An engineered gaseous suppression package that discharges without water or cleanup residue in critical equipment spaces.
- Residue-Free Gaseous Discharge
- Supervised Cylinder Bank
- Engineered Nozzle Network
- Integrated Releasing Controls
مقدمة المنتج
The clean-agent system stores the selected extinguishing medium in supervised cylinders connected to a calculated distribution network. Detection and releasing controls manage alarm verification, shutdown interfaces and discharge sequencing, while pressure switches report system operation. Cylinder capacity, nozzle orifices and room integrity requirements are engineered for the actual protected volume and hazard.
الخصائص الرئيسية
Supervised valves and pressure contacts report system readiness.
Calculated pipe and nozzle sizing distributes agent through the protected enclosure.
Releasing controls coordinate alarms, ventilation shutdown and manual abort functions.
مخاوف المنتج للعملاء
Critical electronics need rapid fire suppression without conductive water or persistent residue, yet discharge must remain engineered for occupant and enclosure conditions.
Water discharge can damage energized controls and clean equipment.The selected clean agent suppresses fire as a gas and leaves no particulate residue.
An undersized agent quantity fails to reach the design concentration.Cylinder capacity is calculated from protected volume, leakage and design conditions.
Open dampers allow agent to escape before hold time is achieved.The release panel coordinates ventilation shutdown and closure interfaces.
Accidental discharge disrupts production.Cross-zoned detection, manual abort and supervised circuits support controlled release logic.
تطبيقات نموذجية
Cleanroom control roomsProcess equipment enclosuresElectrical switch roomsCritical data and instrumentation spaces
المعلمات الفنية
Typical cylinder-bank construction values are listed below; agent quantity, nozzle drilling and release logic remain specific to the protected hazard.
| المواد الأساسية | Painted steel agent cylinders with brass valves and steel or stainless distribution pipe |
|---|---|
| سمك اللوحة | 2.5-6.0 mm cylinder wall depending on pressure and capacity |
| العرض الفعال | 300-1800 mm cylinder-bank width |
| الحد الأقصى الطول | Up to 2200 mm cylinder and manifold height |
| الصلب يواجه سمك | 1.2-2.0 mm releasing-control enclosure panels |
| الكثافة الأساسية | 7850 kg/m³ for steel pressure-vessel parts |
| الموصلية الحرارية | 45-60 W/(m·K) for carbon-steel components |
| إنهاء السطح | Red or white protective coating with corrosion-resistant valve hardware |
| نوع المشترك | High-pressure threaded or flared manifold with supervised discharge valves |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Single or multi-cylinder bankMain/reserve arrangementLocal releasing panelRemote alarm and shutdown interfaces
Planning a Clean Agent Fire Suppression System specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
