Complete clean-agent suppression cylinder bank and release panel in three-quarter view

クリーンルーム排水 · 衛生 · 安全設備

クリーンエージェント消火システム

An engineered gaseous suppression package that discharges without water or cleanup residue in critical equipment spaces.

Residue-Free Gaseous Discharge
Supervised Cylinder Bank
Engineered Nozzle Network
Integrated Releasing Controls

見積もりリクエスト製品案内

商品紹介

The clean-agent system stores the selected extinguishing medium in supervised cylinders connected to a calculated distribution network. Detection and releasing controls manage alarm verification, shutdown interfaces and discharge sequencing, while pressure switches report system operation. Cylinder capacity, nozzle orifices and room integrity requirements are engineered for the actual protected volume and hazard.

主要な特徴

Gaseous discharge avoids water damage and post-event powder cleanup.

Supervised valves and pressure contacts report system readiness.

Calculated pipe and nozzle sizing distributes agent through the protected enclosure.

Releasing controls coordinate alarms, ventilation shutdown and manual abort functions.

お客様の製品に関する懸念事項

Critical electronics need rapid fire suppression without conductive water or persistent residue, yet discharge must remain engineered for occupant and enclosure conditions.

Water discharge can damage energized controls and clean equipment.The selected clean agent suppresses fire as a gas and leaves no particulate residue.

An undersized agent quantity fails to reach the design concentration.Cylinder capacity is calculated from protected volume, leakage and design conditions.

Open dampers allow agent to escape before hold time is achieved.The release panel coordinates ventilation shutdown and closure interfaces.

Accidental discharge disrupts production.Cross-zoned detection, manual abort and supervised circuits support controlled release logic.

典型的な用途

Cleanroom control roomsProcess equipment enclosuresElectrical switch roomsCritical data and instrumentation spaces

技術的なパラメータ

Typical cylinder-bank construction values are listed below; agent quantity, nozzle drilling and release logic remain specific to the protected hazard.

コア材料	Painted steel agent cylinders with brass valves and steel or stainless distribution pipe
パネルの厚さ	2.5-6.0 mm cylinder wall depending on pressure and capacity
有効幅	300-1800 mm cylinder-bank width
最大長さ	Up to 2200 mm cylinder and manifold height
鋼鉄の厚さを直面する	1.2-2.0 mm releasing-control enclosure panels
コア密度	7850 kg/m³ for steel pressure-vessel parts
熱伝導率	45-60 W/(m·K) for carbon-steel components
表面仕上げ	Red or white protective coating with corrosion-resistant valve hardware
ジョイントタイプ	High-pressure threaded or flared manifold with supervised discharge valves
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Single or multi-cylinder bankMain/reserve arrangementLocal releasing panelRemote alarm and shutdown interfaces

Planning a Clean Agent Fire Suppression System specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する