Complete clean-agent suppression cylinder bank and release panel in three-quarter view

Cleanroom Drainage, Peralatan Kebersihan dan Keselamatan

Sistem Pemadam Api Agen Bersih Sistem Pemadam Api Agen Bersih

An engineered gaseous suppression package that discharges without water or cleanup residue in critical equipment spaces.

Residue-Free Gaseous Discharge
Supervised Cylinder Bank
Engineered Nozzle Network
Integrated Releasing Controls

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The clean-agent system stores the selected extinguishing medium in supervised cylinders connected to a calculated distribution network. Detection and releasing controls manage alarm verification, shutdown interfaces and discharge sequencing, while pressure switches report system operation. Cylinder capacity, nozzle orifices and room integrity requirements are engineered for the actual protected volume and hazard.

Fitur utama:

Gaseous discharge avoids water damage and post-event powder cleanup.

Supervised valves and pressure contacts report system readiness.

Calculated pipe and nozzle sizing distributes agent through the protected enclosure.

Releasing controls coordinate alarms, ventilation shutdown and manual abort functions.

Kekhawatiran produk pelanggan

Critical electronics need rapid fire suppression without conductive water or persistent residue, yet discharge must remain engineered for occupant and enclosure conditions.

Water discharge can damage energized controls and clean equipment.The selected clean agent suppresses fire as a gas and leaves no particulate residue.

An undersized agent quantity fails to reach the design concentration.Cylinder capacity is calculated from protected volume, leakage and design conditions.

Open dampers allow agent to escape before hold time is achieved.The release panel coordinates ventilation shutdown and closure interfaces.

Accidental discharge disrupts production.Cross-zoned detection, manual abort and supervised circuits support controlled release logic.

Aplikasi yang Tipis

Cleanroom control roomsProcess equipment enclosuresElectrical switch roomsCritical data and instrumentation spaces

Parameter teknis

Typical cylinder-bank construction values are listed below; agent quantity, nozzle drilling and release logic remain specific to the protected hazard.

Bahan inti	Painted steel agent cylinders with brass valves and steel or stainless distribution pipe
Ketebalan Panel (Panel Thickness)	2.5-6.0 mm cylinder wall depending on pressure and capacity
Efektif lebar	300-1800 mm cylinder-bank width
Panjang maksimum	Up to 2200 mm cylinder and manifold height
Baja menghadap ketebalan	1.2-2.0 mm releasing-control enclosure panels
Kepadatan inti (core density)	7850 kg/m³ for steel pressure-vessel parts
Konduktivitas Termal (Thermal Conductivity)	45-60 W/(m·K) for carbon-steel components
Permukaan selesai	Red or white protective coating with corrosion-resistant valve hardware
Jenis Bersama	High-pressure threaded or flared manifold with supervised discharge valves
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Single or multi-cylinder bankMain/reserve arrangementLocal releasing panelRemote alarm and shutdown interfaces

Planning a Clean Agent Fire Suppression System specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami