Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraum Drainage, Hygiene und Sicherheitsgeräte
Clean Agent Brandlöschungssystem
An engineered gaseous suppression package that discharges without water or cleanup residue in critical equipment spaces.
- Residue-Free Gaseous Discharge
- Supervised Cylinder Bank
- Engineered Nozzle Network
- Integrated Releasing Controls
Produkteinführung
The clean-agent system stores the selected extinguishing medium in supervised cylinders connected to a calculated distribution network. Detection and releasing controls manage alarm verification, shutdown interfaces and discharge sequencing, while pressure switches report system operation. Cylinder capacity, nozzle orifices and room integrity requirements are engineered for the actual protected volume and hazard.
Key Features
Supervised valves and pressure contacts report system readiness.
Calculated pipe and nozzle sizing distributes agent through the protected enclosure.
Releasing controls coordinate alarms, ventilation shutdown and manual abort functions.
Kunden Produktbedenken
Critical electronics need rapid fire suppression without conductive water or persistent residue, yet discharge must remain engineered for occupant and enclosure conditions.
Water discharge can damage energized controls and clean equipment.The selected clean agent suppresses fire as a gas and leaves no particulate residue.
An undersized agent quantity fails to reach the design concentration.Cylinder capacity is calculated from protected volume, leakage and design conditions.
Open dampers allow agent to escape before hold time is achieved.The release panel coordinates ventilation shutdown and closure interfaces.
Accidental discharge disrupts production.Cross-zoned detection, manual abort and supervised circuits support controlled release logic.
Typische Anwendungen
Cleanroom control roomsProcess equipment enclosuresElectrical switch roomsCritical data and instrumentation spaces
Technische Parameter
Typical cylinder-bank construction values are listed below; agent quantity, nozzle drilling and release logic remain specific to the protected hazard.
| Core Material | Painted steel agent cylinders with brass valves and steel or stainless distribution pipe |
|---|---|
| Panel Dicke | 2.5-6.0 mm cylinder wall depending on pressure and capacity |
| Effektive Breite | 300-1800 mm cylinder-bank width |
| Maximale Länge | Up to 2200 mm cylinder and manifold height |
| Stahl facing Dicke | 1.2-2.0 mm releasing-control enclosure panels |
| Kerndichte | 7850 kg/m³ for steel pressure-vessel parts |
| Thermische Leitfähigkeit | 45-60 W/(m·K) for carbon-steel components |
| Oberfläche Finish | Red or white protective coating with corrosion-resistant valve hardware |
| Gemeinsamer Typ | High-pressure threaded or flared manifold with supervised discharge valves |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Single or multi-cylinder bankMain/reserve arrangementLocal releasing panelRemote alarm and shutdown interfaces
Planning a Clean Agent Fire Suppression System specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
