Complete clean-agent suppression cylinder bank and release panel in three-quarter view

클린룸 배수, 위생 및 안전 장비

클린 에이전트 화재 진압 시스템

An engineered gaseous suppression package that discharges without water or cleanup residue in critical equipment spaces.

Residue-Free Gaseous Discharge
Supervised Cylinder Bank
Engineered Nozzle Network
Integrated Releasing Controls

견적 요청 제품 찾아보기

상품 소개

The clean-agent system stores the selected extinguishing medium in supervised cylinders connected to a calculated distribution network. Detection and releasing controls manage alarm verification, shutdown interfaces and discharge sequencing, while pressure switches report system operation. Cylinder capacity, nozzle orifices and room integrity requirements are engineered for the actual protected volume and hazard.

주요 기능

Gaseous discharge avoids water damage and post-event powder cleanup.

Supervised valves and pressure contacts report system readiness.

Calculated pipe and nozzle sizing distributes agent through the protected enclosure.

Releasing controls coordinate alarms, ventilation shutdown and manual abort functions.

고객 제품 관심사

Critical electronics need rapid fire suppression without conductive water or persistent residue, yet discharge must remain engineered for occupant and enclosure conditions.

Water discharge can damage energized controls and clean equipment.The selected clean agent suppresses fire as a gas and leaves no particulate residue.

An undersized agent quantity fails to reach the design concentration.Cylinder capacity is calculated from protected volume, leakage and design conditions.

Open dampers allow agent to escape before hold time is achieved.The release panel coordinates ventilation shutdown and closure interfaces.

Accidental discharge disrupts production.Cross-zoned detection, manual abort and supervised circuits support controlled release logic.

일반적인 응용 프로그램

Cleanroom control roomsProcess equipment enclosuresElectrical switch roomsCritical data and instrumentation spaces

기술 매개변수

Typical cylinder-bank construction values are listed below; agent quantity, nozzle drilling and release logic remain specific to the protected hazard.

핵심 재료	Painted steel agent cylinders with brass valves and steel or stainless distribution pipe
패널 두께	2.5-6.0 mm cylinder wall depending on pressure and capacity
유효 폭	300-1800 mm cylinder-bank width
최대 길이	Up to 2200 mm cylinder and manifold height
강철 면면 두께	1.2-2.0 mm releasing-control enclosure panels
코어 밀도	7850 kg/m³ for steel pressure-vessel parts
열전도도 (Thermal Conductivity)	45-60 W/(m·K) for carbon-steel components
표면 마무리	Red or white protective coating with corrosion-resistant valve hardware
접합 유형	High-pressure threaded or flared manifold with supervised discharge valves
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Single or multi-cylinder bankMain/reserve arrangementLocal releasing panelRemote alarm and shutdown interfaces

Planning a Clean Agent Fire Suppression System specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.