English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات الغرف النظيفة المحددة للصناعة
A التلقائي التمهيد غسالة
A compact stainless three-brush washer that automatically scrubs boot soles and shafts with metered water and cleaning chemical.
- Three-Brush Cleaning
- Automatic Water and Dosing
- Stable Grab Rail
- Wash-Down Stainless Basin
مقدمة المنتج
The automatic boot washer positions one powered horizontal brush beneath the sole and two vertical brushes around the boot shaft. Activation starts coordinated brushing with water and detergent inside a drained stainless basin. The overhead rail supports the operator, while accessible controls and a separate dosing enclosure simplify use and service in wet food-production entrances.
الخصائص الرئيسية
Automatic spray and chemical dosing standardize each cleaning cycle.
A rigid overhead handrail improves balance while the brushes rotate.
The open stainless basin exposes the brush set for rinsing and inspection.
مخاوف المنتج للعملاء
Manual boot cleaning is inconsistent, time-consuming and often misses shaft surfaces where food soil remains attached.
Hand brushing produces variable contact time and coverage.Three powered brushes apply repeatable mechanical action to soles and both boot shafts.
Workers may use too little or too much cleaning chemical.The integrated dosing enclosure meters solution during the automatic cycle.
Rotating brushes can affect operator balance.A full-width stainless grab arch provides stable support throughout cleaning.
Enclosed mechanisms are difficult to rinse after production.An open basin and exposed removable brush assemblies support wash-down and inspection.
تطبيقات نموذجية
Meat and poultry plantsDairy processing entrancesSeafood and ready-meal productionWet pharmaceutical utility areas
المعلمات الفنية
Typical configurable construction values for a compact automatic boot washer are listed below.
| المواد الأساسية | 304 stainless-steel frame and basin with blue food-grade polymer brushes |
|---|---|
| سمك اللوحة | 40-80 mm basin and drive-enclosure sections |
| العرض الفعال | 450-700 mm clear boot-cleaning opening |
| الحد الأقصى الطول | Up to 1100 mm overall machine length |
| الصلب يواجه سمك | 1.5-2.5 mm stainless basin and enclosure facing |
| الكثافة الأساسية | 7950-8050 kg/m³ for stainless-steel construction |
| الموصلية الحرارية | 14-16 W / (m · K) للفولاذ المقاوم للصدأ الأوستنيتي |
| إنهاء السطح | Brushed hygienic stainless with blue replaceable polymer brushes |
| نوع المشترك | Welded drained basin with removable brush shafts and sealed control/dosing enclosures |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Photocell or push-button activationAlternative brush stiffness and heightDetergent or disinfectant dosing packageLeft- or right-side service enclosure
Planning a Automatic Boot Washer specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
