Automatic boot washer complete three-quarter view with three blue brushes and grab rail

산업별 클린룸 장비

자동 부트 세탁기

A compact stainless three-brush washer that automatically scrubs boot soles and shafts with metered water and cleaning chemical.

Three-Brush Cleaning
Automatic Water and Dosing
Stable Grab Rail
Wash-Down Stainless Basin

견적 요청 제품 찾아보기

상품 소개

The automatic boot washer positions one powered horizontal brush beneath the sole and two vertical brushes around the boot shaft. Activation starts coordinated brushing with water and detergent inside a drained stainless basin. The overhead rail supports the operator, while accessible controls and a separate dosing enclosure simplify use and service in wet food-production entrances.

주요 기능

One sole brush and two opposed shaft brushes clean three footwear surfaces together.

Automatic spray and chemical dosing standardize each cleaning cycle.

A rigid overhead handrail improves balance while the brushes rotate.

The open stainless basin exposes the brush set for rinsing and inspection.

고객 제품 관심사

Manual boot cleaning is inconsistent, time-consuming and often misses shaft surfaces where food soil remains attached.

Hand brushing produces variable contact time and coverage.Three powered brushes apply repeatable mechanical action to soles and both boot shafts.

Workers may use too little or too much cleaning chemical.The integrated dosing enclosure meters solution during the automatic cycle.

Rotating brushes can affect operator balance.A full-width stainless grab arch provides stable support throughout cleaning.

Enclosed mechanisms are difficult to rinse after production.An open basin and exposed removable brush assemblies support wash-down and inspection.

일반적인 응용 프로그램

Meat and poultry plantsDairy processing entrancesSeafood and ready-meal productionWet pharmaceutical utility areas

기술 매개변수

Typical configurable construction values for a compact automatic boot washer are listed below.

핵심 재료	304 stainless-steel frame and basin with blue food-grade polymer brushes
패널 두께	40-80 mm basin and drive-enclosure sections
유효 폭	450-700 mm clear boot-cleaning opening
최대 길이	Up to 1100 mm overall machine length
강철 면면 두께	1.5-2.5 mm stainless basin and enclosure facing
코어 밀도	7950-8050 kg/m³ for stainless-steel construction
열전도도 (Thermal Conductivity)	14 - 16 W / (m · K) 오스테나이트 스테인레스 스틸
표면 마무리	Brushed hygienic stainless with blue replaceable polymer brushes
접합 유형	Welded drained basin with removable brush shafts and sealed control/dosing enclosures
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Photocell or push-button activationAlternative brush stiffness and heightDetergent or disinfectant dosing packageLeft- or right-side service enclosure

Planning a Automatic Boot Washer specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.