Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de sala limpia específicos de la industria
Lavadora automática Boot
A compact stainless three-brush washer that automatically scrubs boot soles and shafts with metered water and cleaning chemical.
- Three-Brush Cleaning
- Automatic Water and Dosing
- Stable Grab Rail
- Wash-Down Stainless Basin
Introducción del producto
The automatic boot washer positions one powered horizontal brush beneath the sole and two vertical brushes around the boot shaft. Activation starts coordinated brushing with water and detergent inside a drained stainless basin. The overhead rail supports the operator, while accessible controls and a separate dosing enclosure simplify use and service in wet food-production entrances.
Características clave
Automatic spray and chemical dosing standardize each cleaning cycle.
A rigid overhead handrail improves balance while the brushes rotate.
The open stainless basin exposes the brush set for rinsing and inspection.
Preocupaciones del producto del cliente
Manual boot cleaning is inconsistent, time-consuming and often misses shaft surfaces where food soil remains attached.
Hand brushing produces variable contact time and coverage.Three powered brushes apply repeatable mechanical action to soles and both boot shafts.
Workers may use too little or too much cleaning chemical.The integrated dosing enclosure meters solution during the automatic cycle.
Rotating brushes can affect operator balance.A full-width stainless grab arch provides stable support throughout cleaning.
Enclosed mechanisms are difficult to rinse after production.An open basin and exposed removable brush assemblies support wash-down and inspection.
Aplicaciones típicas
Meat and poultry plantsDairy processing entrancesSeafood and ready-meal productionWet pharmaceutical utility areas
Parámetros técnicos
Typical configurable construction values for a compact automatic boot washer are listed below.
| Materiales Core | 304 stainless-steel frame and basin with blue food-grade polymer brushes |
|---|---|
| Panel de espesor | 40-80 mm basin and drive-enclosure sections |
| Ancho efectivo | 450-700 mm clear boot-cleaning opening |
| Longitud máxima | Up to 1100 mm overall machine length |
| Acero frente a espesor | 1.5-2.5 mm stainless basin and enclosure facing |
| Densidad Core | 7950-8050 kg/m³ for stainless-steel construction |
| Conductividad térmica | 14-16 W/(m·K) for austenitic stainless steel |
| Superficie acabada | Brushed hygienic stainless with blue replaceable polymer brushes |
| Tipo conjunto | Welded drained basin with removable brush shafts and sealed control/dosing enclosures |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Photocell or push-button activationAlternative brush stiffness and heightDetergent or disinfectant dosing packageLeft- or right-side service enclosure
Planning a Automatic Boot Washer specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
