English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Оборудование для чистых помещений
Автоматическая стиральная машина
A compact stainless three-brush washer that automatically scrubs boot soles and shafts with metered water and cleaning chemical.
- Three-Brush Cleaning
- Automatic Water and Dosing
- Stable Grab Rail
- Wash-Down Stainless Basin
Введение продукции
The automatic boot washer positions one powered horizontal brush beneath the sole and two vertical brushes around the boot shaft. Activation starts coordinated brushing with water and detergent inside a drained stainless basin. The overhead rail supports the operator, while accessible controls and a separate dosing enclosure simplify use and service in wet food-production entrances.
Основные характеристики
Automatic spray and chemical dosing standardize each cleaning cycle.
A rigid overhead handrail improves balance while the brushes rotate.
The open stainless basin exposes the brush set for rinsing and inspection.
Обеспокоенность клиентов продуктами
Manual boot cleaning is inconsistent, time-consuming and often misses shaft surfaces where food soil remains attached.
Hand brushing produces variable contact time and coverage.Three powered brushes apply repeatable mechanical action to soles and both boot shafts.
Workers may use too little or too much cleaning chemical.The integrated dosing enclosure meters solution during the automatic cycle.
Rotating brushes can affect operator balance.A full-width stainless grab arch provides stable support throughout cleaning.
Enclosed mechanisms are difficult to rinse after production.An open basin and exposed removable brush assemblies support wash-down and inspection.
Типичные приложения
Meat and poultry plantsDairy processing entrancesSeafood and ready-meal productionWet pharmaceutical utility areas
Технические параметры
Typical configurable construction values for a compact automatic boot washer are listed below.
| Основной материал | 304 stainless-steel frame and basin with blue food-grade polymer brushes |
|---|---|
| Толщина панели | 40-80 mm basin and drive-enclosure sections |
| эффективная ширина | 450-700 mm clear boot-cleaning opening |
| Максимальная длина | Up to 1100 mm overall machine length |
| Толщина линий стали | 1.5-2.5 mm stainless basin and enclosure facing |
| Плотность ядра | 7950-8050 kg/m³ for stainless-steel construction |
| Теплопроводимость | 14-16 W/(m·K) for austenitic stainless steel |
| Поверхностная отделка | Brushed hygienic stainless with blue replaceable polymer brushes |
| Объединенный тип | Welded drained basin with removable brush shafts and sealed control/dosing enclosures |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Photocell or push-button activationAlternative brush stiffness and heightDetergent or disinfectant dosing packageLeft- or right-side service enclosure
Planning a Automatic Boot Washer specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
