Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Equipement de salle blanche spécifique à l'industrie
Lavatrice automatique Boot par
A compact stainless three-brush washer that automatically scrubs boot soles and shafts with metered water and cleaning chemical.
- Three-Brush Cleaning
- Automatic Water and Dosing
- Stable Grab Rail
- Wash-Down Stainless Basin
Introduction de produit
The automatic boot washer positions one powered horizontal brush beneath the sole and two vertical brushes around the boot shaft. Activation starts coordinated brushing with water and detergent inside a drained stainless basin. The overhead rail supports the operator, while accessible controls and a separate dosing enclosure simplify use and service in wet food-production entrances.
Key Features
Automatic spray and chemical dosing standardize each cleaning cycle.
A rigid overhead handrail improves balance while the brushes rotate.
The open stainless basin exposes the brush set for rinsing and inspection.
Préoccupations du client produit
Manual boot cleaning is inconsistent, time-consuming and often misses shaft surfaces where food soil remains attached.
Hand brushing produces variable contact time and coverage.Three powered brushes apply repeatable mechanical action to soles and both boot shafts.
Workers may use too little or too much cleaning chemical.The integrated dosing enclosure meters solution during the automatic cycle.
Rotating brushes can affect operator balance.A full-width stainless grab arch provides stable support throughout cleaning.
Enclosed mechanisms are difficult to rinse after production.An open basin and exposed removable brush assemblies support wash-down and inspection.
Les applications typiques
Meat and poultry plantsDairy processing entrancesSeafood and ready-meal productionWet pharmaceutical utility areas
Paramètres techniques
Typical configurable construction values for a compact automatic boot washer are listed below.
| Matériaux de base | 304 stainless-steel frame and basin with blue food-grade polymer brushes |
|---|---|
| Panneau épaisseur | 40-80 mm basin and drive-enclosure sections |
| Largeur effective | 450-700 mm clear boot-cleaning opening |
| Longueur maximale | Up to 1100 mm overall machine length |
| Acier face épaisseur | 1.5-2.5 mm stainless basin and enclosure facing |
| Densité Core | 7950-8050 kg/m³ for stainless-steel construction |
| Conductivité thermique | 14 - 16 W / (m · K) pour l'acier inoxydable austénitique par |
| surface finie | Brushed hygienic stainless with blue replaceable polymer brushes |
| Type joint | Welded drained basin with removable brush shafts and sealed control/dosing enclosures |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Photocell or push-button activationAlternative brush stiffness and heightDetergent or disinfectant dosing packageLeft- or right-side service enclosure
Planning a Automatic Boot Washer specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
