Automatic boot washer complete three-quarter view with three blue brushes and grab rail

Peralatan Bilik Bersih Spesifik Industri

Mesin Basuh Boot Automatik

A compact stainless three-brush washer that automatically scrubs boot soles and shafts with metered water and cleaning chemical.

Three-Brush Cleaning
Automatic Water and Dosing
Stable Grab Rail
Wash-Down Stainless Basin

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The automatic boot washer positions one powered horizontal brush beneath the sole and two vertical brushes around the boot shaft. Activation starts coordinated brushing with water and detergent inside a drained stainless basin. The overhead rail supports the operator, while accessible controls and a separate dosing enclosure simplify use and service in wet food-production entrances.

Ciri-ciri Utama

One sole brush and two opposed shaft brushes clean three footwear surfaces together.

Automatic spray and chemical dosing standardize each cleaning cycle.

A rigid overhead handrail improves balance while the brushes rotate.

The open stainless basin exposes the brush set for rinsing and inspection.

Kebimbangan Produk Pelanggan

Manual boot cleaning is inconsistent, time-consuming and often misses shaft surfaces where food soil remains attached.

Hand brushing produces variable contact time and coverage.Three powered brushes apply repeatable mechanical action to soles and both boot shafts.

Workers may use too little or too much cleaning chemical.The integrated dosing enclosure meters solution during the automatic cycle.

Rotating brushes can affect operator balance.A full-width stainless grab arch provides stable support throughout cleaning.

Enclosed mechanisms are difficult to rinse after production.An open basin and exposed removable brush assemblies support wash-down and inspection.

Permohonan yang biasa

Meat and poultry plantsDairy processing entrancesSeafood and ready-meal productionWet pharmaceutical utility areas

Parameter teknikal

Typical configurable construction values for a compact automatic boot washer are listed below.

Bahan Teras	304 stainless-steel frame and basin with blue food-grade polymer brushes
Ketebalan Panel	40-80 mm basin and drive-enclosure sections
Lebar berkesan	450-700 mm clear boot-cleaning opening
Panjang maksimum	Up to 1100 mm overall machine length
Keluli Menghadapi Ketebalan	1.5-2.5 mm stainless basin and enclosure facing
Ketumpatan teras	7950-8050 kg/m³ for stainless-steel construction
Kekonduksian Terma	14-16 W / (m · K) untuk keluli tahan karat austenit
Kemasan permukaan	Brushed hygienic stainless with blue replaceable polymer brushes
Jenis Bersatu	Welded drained basin with removable brush shafts and sealed control/dosing enclosures
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Photocell or push-button activationAlternative brush stiffness and heightDetergent or disinfectant dosing packageLeft- or right-side service enclosure

Planning a Automatic Boot Washer specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami