English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
إضاءة الغرف النظيفة والمعدات الكهربائية
Airtight غرف نظيفة ضوء
A compression-sealed LED fixture designed to preserve the pressure boundary at the lens, housing seams, cable entry and ceiling interface.
- Compression-Sealed Lens
- Welded Enclosure Seams
- Airtight Ceiling Interface
- Sealed Electrical Entry
مقدمة المنتج
Unlike a general cleanroom fixture, the hermetically sealed luminaire treats every enclosure path as part of the room pressure boundary. The metal back box uses continuously closed seams, the lens is compressed against a continuous gasket, and the ceiling trim seals independently to the panel opening. Cable entry passes through a rated gland or sealed conduit hub so wiring does not bypass the enclosure seal.
الخصائص الرئيسية
Closed housing seams prevent leakage through folded corner joints.
The ceiling flange has a dedicated seal separate from the removable optical door.
A threaded cable gland closes around the incoming power cable.
Captive compression latches apply repeatable pressure after maintenance.
مخاوف المنتج للعملاء
Pressure-controlled rooms lose integrity when fixture seams and cable routes form parallel leakage paths around the ceiling seal.
A sealed lens still leaks through an open back-box corner.Continuously closed enclosure seams complete the barrier behind the optic.
Removing the lens disturbs the ceiling-to-fixture seal.Independent ceiling and optical gaskets separate those two interfaces.
Loose latches compress one side of the gasket more than another.Evenly spaced captive compression points load the perimeter consistently.
An ordinary cable knockout bypasses the sealed housing.A matched threaded gland seals directly around the supply cable or conduit.
تطبيقات نموذجية
Positive-pressure aseptic roomsNegative-pressure containment areasSterile filling suitesHigh-integrity airlocks
المعلمات الفنية
Typical configurable construction ranges for a hermetically sealed cleanroom luminaire are listed below.
| المواد الأساسية | Continuously sealed steel or stainless enclosure with LED light engine, driver and laminated safety-glass or polymer lens |
|---|---|
| سمك اللوحة | 90-160 mm sealed back-box depth |
| العرض الفعال | 300-650 mm room-side frame width |
| الحد الأقصى الطول | Up to 1250 mm complete fixture length |
| الصلب يواجه سمك | 1.0-1.5 mm welded steel or stainless housing |
| الكثافة الأساسية | Approximately 2500 kg/m³ for the sealed glass optical panel |
| الموصلية الحرارية | 0.8-1.1 W/(m·K) for laminated safety glass |
| إنهاء السطح | White powder-coated or fine-brushed stainless enclosure with flush clear or opal lens |
| نوع المشترك | Dual continuous gaskets at lens and ceiling flange with welded seams and threaded cable gland |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Room-side or top-side maintenanceClear glass, opal glass or polycarbonate opticCoated steel or SUS304/SUS316L bodyPressure-test connection point
Planning a Airtight Cleanroom Light specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
