Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Iluminación de sala limpia y equipos eléctricos
Airtight Cleanroom Luz
A compression-sealed LED fixture designed to preserve the pressure boundary at the lens, housing seams, cable entry and ceiling interface.
- Compression-Sealed Lens
- Welded Enclosure Seams
- Airtight Ceiling Interface
- Sealed Electrical Entry
Introducción del producto
Unlike a general cleanroom fixture, the hermetically sealed luminaire treats every enclosure path as part of the room pressure boundary. The metal back box uses continuously closed seams, the lens is compressed against a continuous gasket, and the ceiling trim seals independently to the panel opening. Cable entry passes through a rated gland or sealed conduit hub so wiring does not bypass the enclosure seal.
Características clave
Closed housing seams prevent leakage through folded corner joints.
The ceiling flange has a dedicated seal separate from the removable optical door.
A threaded cable gland closes around the incoming power cable.
Captive compression latches apply repeatable pressure after maintenance.
Preocupaciones del producto del cliente
Pressure-controlled rooms lose integrity when fixture seams and cable routes form parallel leakage paths around the ceiling seal.
A sealed lens still leaks through an open back-box corner.Continuously closed enclosure seams complete the barrier behind the optic.
Removing the lens disturbs the ceiling-to-fixture seal.Independent ceiling and optical gaskets separate those two interfaces.
Loose latches compress one side of the gasket more than another.Evenly spaced captive compression points load the perimeter consistently.
An ordinary cable knockout bypasses the sealed housing.A matched threaded gland seals directly around the supply cable or conduit.
Aplicaciones típicas
Positive-pressure aseptic roomsNegative-pressure containment areasSuites de llenado estériles
porHigh-integrity airlocks
Parámetros técnicos
Typical configurable construction ranges for a hermetically sealed cleanroom luminaire are listed below.
| Materiales Core | Continuously sealed steel or stainless enclosure with LED light engine, driver and laminated safety-glass or polymer lens |
|---|---|
| Panel de espesor | 90-160 mm sealed back-box depth |
| Ancho efectivo | 300-650 mm room-side frame width |
| Longitud máxima | Up to 1250 mm complete fixture length |
| Acero frente a espesor | 1.0-1.5 mm welded steel or stainless housing |
| Densidad Core | Approximately 2500 kg/m³ for the sealed glass optical panel |
| Conductividad térmica | 0.8-1.1 W/(m·K) for laminated safety glass |
| Superficie acabada | White powder-coated or fine-brushed stainless enclosure with flush clear or opal lens |
| Tipo conjunto | Dual continuous gaskets at lens and ceiling flange with welded seams and threaded cable gland |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Room-side or top-side maintenanceClear glass, opal glass or polycarbonate opticCoated steel or SUS304/SUS316L bodyPressure-test connection point
Planning a Airtight Cleanroom Light specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
