Hermetically sealed cleanroom luminaire with compression-gasketed lens frame

クリーンルーム照明 · 電気機器

密閉クリーンルームライト

A compression-sealed LED fixture designed to preserve the pressure boundary at the lens, housing seams, cable entry and ceiling interface.

Compression-Sealed Lens
Welded Enclosure Seams
Airtight Ceiling Interface
Sealed Electrical Entry

見積もりリクエスト製品案内

商品紹介

Unlike a general cleanroom fixture, the hermetically sealed luminaire treats every enclosure path as part of the room pressure boundary. The metal back box uses continuously closed seams, the lens is compressed against a continuous gasket, and the ceiling trim seals independently to the panel opening. Cable entry passes through a rated gland or sealed conduit hub so wiring does not bypass the enclosure seal.

主要な特徴

A continuous elastomer gasket is compressed uniformly around the complete lens perimeter.

Closed housing seams prevent leakage through folded corner joints.

The ceiling flange has a dedicated seal separate from the removable optical door.

A threaded cable gland closes around the incoming power cable.

Captive compression latches apply repeatable pressure after maintenance.

お客様の製品に関する懸念事項

Pressure-controlled rooms lose integrity when fixture seams and cable routes form parallel leakage paths around the ceiling seal.

A sealed lens still leaks through an open back-box corner.Continuously closed enclosure seams complete the barrier behind the optic.

Removing the lens disturbs the ceiling-to-fixture seal.Independent ceiling and optical gaskets separate those two interfaces.

Loose latches compress one side of the gasket more than another.Evenly spaced captive compression points load the perimeter consistently.

An ordinary cable knockout bypasses the sealed housing.A matched threaded gland seals directly around the supply cable or conduit.

典型的な用途

Positive-pressure aseptic roomsNegative-pressure containment areasSterile filling suitesHigh-integrity airlocks

技術的なパラメータ

Typical configurable construction ranges for a hermetically sealed cleanroom luminaire are listed below.

コア材料	Continuously sealed steel or stainless enclosure with LED light engine, driver and laminated safety-glass or polymer lens
パネルの厚さ	90-160 mm sealed back-box depth
有効幅	300-650 mm room-side frame width
最大長さ	Up to 1250 mm complete fixture length
鋼鉄の厚さを直面する	1.0-1.5 mm welded steel or stainless housing
コア密度	Approximately 2500 kg/m³ for the sealed glass optical panel
熱伝導率	0.8-1.1 W/(m·K) for laminated safety glass
表面仕上げ	White powder-coated or fine-brushed stainless enclosure with flush clear or opal lens
ジョイントタイプ	Dual continuous gaskets at lens and ceiling flange with welded seams and threaded cable gland
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Room-side or top-side maintenanceClear glass, opal glass or polycarbonate opticCoated steel or SUS304/SUS316L bodyPressure-test connection point

Planning a Airtight Cleanroom Light specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する