İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Aydınlatma ve Elektrik Ekipmanları
Hava geçirmez temiz oda ışığı
A compression-sealed LED fixture designed to preserve the pressure boundary at the lens, housing seams, cable entry and ceiling interface.
- Compression-Sealed Lens
- Welded Enclosure Seams
- Airtight Ceiling Interface
- Sealed Electrical Entry
Ürün tanıtımı
Unlike a general cleanroom fixture, the hermetically sealed luminaire treats every enclosure path as part of the room pressure boundary. The metal back box uses continuously closed seams, the lens is compressed against a continuous gasket, and the ceiling trim seals independently to the panel opening. Cable entry passes through a rated gland or sealed conduit hub so wiring does not bypass the enclosure seal.
Ana Özellikler
Closed housing seams prevent leakage through folded corner joints.
The ceiling flange has a dedicated seal separate from the removable optical door.
A threaded cable gland closes around the incoming power cable.
Captive compression latches apply repeatable pressure after maintenance.
Müşteri Ürün Sorunları
Pressure-controlled rooms lose integrity when fixture seams and cable routes form parallel leakage paths around the ceiling seal.
A sealed lens still leaks through an open back-box corner.Continuously closed enclosure seams complete the barrier behind the optic.
Removing the lens disturbs the ceiling-to-fixture seal.Independent ceiling and optical gaskets separate those two interfaces.
Loose latches compress one side of the gasket more than another.Evenly spaced captive compression points load the perimeter consistently.
An ordinary cable knockout bypasses the sealed housing.A matched threaded gland seals directly around the supply cable or conduit.
Tipik uygulamalar
Positive-pressure aseptic roomsNegative-pressure containment areasSterile filling suitesHigh-integrity airlocks
Teknik parametreler
Typical configurable construction ranges for a hermetically sealed cleanroom luminaire are listed below.
| Temel malzemeler | Continuously sealed steel or stainless enclosure with LED light engine, driver and laminated safety-glass or polymer lens |
|---|---|
| Panel kalınlığı | 90-160 mm sealed back-box depth |
| Effective Width (Etkili Genişlik) | 300-650 mm room-side frame width |
| Maksimum uzunluk | Up to 1250 mm complete fixture length |
| Çelik yüz yüze kalınlığı | 1.0-1.5 mm welded steel or stainless housing |
| Core Density (Çekirdek Yoğunluğu) | Approximately 2500 kg/m³ for the sealed glass optical panel |
| Termal İletkenlik | 0.8-1.1 W/(m·K) for laminated safety glass |
| Yüzey bitirme | White powder-coated or fine-brushed stainless enclosure with flush clear or opal lens |
| Ortak tip | Dual continuous gaskets at lens and ceiling flange with welded seams and threaded cable gland |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Room-side or top-side maintenanceClear glass, opal glass or polycarbonate opticCoated steel or SUS304/SUS316L bodyPressure-test connection point
Planning a Airtight Cleanroom Light specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
