Hermetically sealed cleanroom luminaire with compression-gasketed lens frame

Pencahayaan bilik bersih dan peralatan elektrik

Cahaya bilik bersih kedap udara

A compression-sealed LED fixture designed to preserve the pressure boundary at the lens, housing seams, cable entry and ceiling interface.

Compression-Sealed Lens
Welded Enclosure Seams
Airtight Ceiling Interface
Sealed Electrical Entry

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

Unlike a general cleanroom fixture, the hermetically sealed luminaire treats every enclosure path as part of the room pressure boundary. The metal back box uses continuously closed seams, the lens is compressed against a continuous gasket, and the ceiling trim seals independently to the panel opening. Cable entry passes through a rated gland or sealed conduit hub so wiring does not bypass the enclosure seal.

Ciri-ciri Utama

A continuous elastomer gasket is compressed uniformly around the complete lens perimeter.

Closed housing seams prevent leakage through folded corner joints.

The ceiling flange has a dedicated seal separate from the removable optical door.

A threaded cable gland closes around the incoming power cable.

Captive compression latches apply repeatable pressure after maintenance.

Kebimbangan Produk Pelanggan

Pressure-controlled rooms lose integrity when fixture seams and cable routes form parallel leakage paths around the ceiling seal.

A sealed lens still leaks through an open back-box corner.Continuously closed enclosure seams complete the barrier behind the optic.

Removing the lens disturbs the ceiling-to-fixture seal.Independent ceiling and optical gaskets separate those two interfaces.

Loose latches compress one side of the gasket more than another.Evenly spaced captive compression points load the perimeter consistently.

An ordinary cable knockout bypasses the sealed housing.A matched threaded gland seals directly around the supply cable or conduit.

Permohonan yang biasa

Positive-pressure aseptic roomsNegative-pressure containment areasSterile filling suitesHigh-integrity airlocks

Parameter teknikal

Typical configurable construction ranges for a hermetically sealed cleanroom luminaire are listed below.

Bahan Teras	Continuously sealed steel or stainless enclosure with LED light engine, driver and laminated safety-glass or polymer lens
Ketebalan Panel	90-160 mm sealed back-box depth
Lebar berkesan	300-650 mm room-side frame width
Panjang maksimum	Up to 1250 mm complete fixture length
Keluli Menghadapi Ketebalan	1.0-1.5 mm welded steel or stainless housing
Ketumpatan teras	Approximately 2500 kg/m³ for the sealed glass optical panel
Kekonduksian Terma	0.8-1.1 W/(m·K) for laminated safety glass
Kemasan permukaan	White powder-coated or fine-brushed stainless enclosure with flush clear or opal lens
Jenis Bersatu	Dual continuous gaskets at lens and ceiling flange with welded seams and threaded cable gland
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Room-side or top-side maintenanceClear glass, opal glass or polycarbonate opticCoated steel or SUS304/SUS316L bodyPressure-test connection point

Planning a Airtight Cleanroom Light specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami