English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Освещение и электрическое оборудование в чистых помещениях
воздухонепроницаемый свет чистой комнаты
A compression-sealed LED fixture designed to preserve the pressure boundary at the lens, housing seams, cable entry and ceiling interface.
- Compression-Sealed Lens
- Welded Enclosure Seams
- Airtight Ceiling Interface
- Sealed Electrical Entry
Введение продукции
Unlike a general cleanroom fixture, the hermetically sealed luminaire treats every enclosure path as part of the room pressure boundary. The metal back box uses continuously closed seams, the lens is compressed against a continuous gasket, and the ceiling trim seals independently to the panel opening. Cable entry passes through a rated gland or sealed conduit hub so wiring does not bypass the enclosure seal.
Основные характеристики
Closed housing seams prevent leakage through folded corner joints.
The ceiling flange has a dedicated seal separate from the removable optical door.
A threaded cable gland closes around the incoming power cable.
Captive compression latches apply repeatable pressure after maintenance.
Обеспокоенность клиентов продуктами
Pressure-controlled rooms lose integrity when fixture seams and cable routes form parallel leakage paths around the ceiling seal.
A sealed lens still leaks through an open back-box corner.Continuously closed enclosure seams complete the barrier behind the optic.
Removing the lens disturbs the ceiling-to-fixture seal.Independent ceiling and optical gaskets separate those two interfaces.
Loose latches compress one side of the gasket more than another.Evenly spaced captive compression points load the perimeter consistently.
An ordinary cable knockout bypasses the sealed housing.A matched threaded gland seals directly around the supply cable or conduit.
Типичные приложения
Positive-pressure aseptic roomsNegative-pressure containment areasSterile filling suitesHigh-integrity airlocks
Технические параметры
Typical configurable construction ranges for a hermetically sealed cleanroom luminaire are listed below.
| Основной материал | Continuously sealed steel or stainless enclosure with LED light engine, driver and laminated safety-glass or polymer lens |
|---|---|
| Толщина панели | 90-160 mm sealed back-box depth |
| эффективная ширина | 300-650 mm room-side frame width |
| Максимальная длина | Up to 1250 mm complete fixture length |
| Толщина линий стали | 1.0-1.5 mm welded steel or stainless housing |
| Плотность ядра | Approximately 2500 kg/m³ for the sealed glass optical panel |
| Теплопроводимость | 0.8-1.1 W/(m·K) for laminated safety glass |
| Поверхностная отделка | White powder-coated or fine-brushed stainless enclosure with flush clear or opal lens |
| Объединенный тип | Dual continuous gaskets at lens and ceiling flange with welded seams and threaded cable gland |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Room-side or top-side maintenanceClear glass, opal glass or polycarbonate opticCoated steel or SUS304/SUS316L bodyPressure-test connection point
Planning a Airtight Cleanroom Light specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
