Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraum Beleuchtung und elektrische Ausrüstung
Airtight Cleanroom Licht
A compression-sealed LED fixture designed to preserve the pressure boundary at the lens, housing seams, cable entry and ceiling interface.
- Compression-Sealed Lens
- Welded Enclosure Seams
- Airtight Ceiling Interface
- Sealed Electrical Entry
Produkteinführung
Unlike a general cleanroom fixture, the hermetically sealed luminaire treats every enclosure path as part of the room pressure boundary. The metal back box uses continuously closed seams, the lens is compressed against a continuous gasket, and the ceiling trim seals independently to the panel opening. Cable entry passes through a rated gland or sealed conduit hub so wiring does not bypass the enclosure seal.
Key Features
Closed housing seams prevent leakage through folded corner joints.
The ceiling flange has a dedicated seal separate from the removable optical door.
A threaded cable gland closes around the incoming power cable.
Captive compression latches apply repeatable pressure after maintenance.
Kunden Produktbedenken
Pressure-controlled rooms lose integrity when fixture seams and cable routes form parallel leakage paths around the ceiling seal.
A sealed lens still leaks through an open back-box corner.Continuously closed enclosure seams complete the barrier behind the optic.
Removing the lens disturbs the ceiling-to-fixture seal.Independent ceiling and optical gaskets separate those two interfaces.
Loose latches compress one side of the gasket more than another.Evenly spaced captive compression points load the perimeter consistently.
An ordinary cable knockout bypasses the sealed housing.A matched threaded gland seals directly around the supply cable or conduit.
Typische Anwendungen
Positive-pressure aseptic roomsNegative-pressure containment areasSterile filling suitesHigh-integrity airlocks
Technische Parameter
Typical configurable construction ranges for a hermetically sealed cleanroom luminaire are listed below.
| Core Material | Continuously sealed steel or stainless enclosure with LED light engine, driver and laminated safety-glass or polymer lens |
|---|---|
| Panel Dicke | 90-160 mm sealed back-box depth |
| Effektive Breite | 300-650 mm room-side frame width |
| Maximale Länge | Up to 1250 mm complete fixture length |
| Stahl facing Dicke | 1.0-1.5 mm welded steel or stainless housing |
| Kerndichte | Approximately 2500 kg/m³ for the sealed glass optical panel |
| Thermische Leitfähigkeit | 0.8-1.1 W/(m·K) for laminated safety glass |
| Oberfläche Finish | White powder-coated or fine-brushed stainless enclosure with flush clear or opal lens |
| Gemeinsamer Typ | Dual continuous gaskets at lens and ceiling flange with welded seams and threaded cable gland |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Room-side or top-side maintenanceClear glass, opal glass or polycarbonate opticCoated steel or SUS304/SUS316L bodyPressure-test connection point
Planning a Airtight Cleanroom Light specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
