English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
غرف الأبحاث معدات قطع الغيار
Air دش قفل المغناطيسي
A compact electromagnetic lock and armature set that holds an air shower door closed during controlled entry and purge sequences.
- Fail-Safe Magnetic Holding
- Matched Armature Plate
- Compact Surface Mounting
- Interlock-Control Compatible
مقدمة المنتج
The air shower magnetic lock uses an energized electromagnetic body and a matching armature plate to hold a swing door during the controlled shower sequence. With no projecting latch bolt, the paired surfaces release cleanly when power is removed and suit frequent automated cycling. The aluminum housings provide a compact, corrosion-resistant assembly for mounting above or beside the door. Replacement work should match holding requirement, supply voltage, available mounting space, cable routing and controller logic.
الخصائص الرئيسية
Fail-safe operation releases the door when lock power is removed.
Compact rectangular components fit narrow air shower headers and frames.
A protected lead connection supports integration with the door-interlock controller.
مخاوف المنتج للعملاء
Stable magnetic holding depends on correct plate alignment, electrical compatibility and full face contact when the door closes.
A misaligned armature plate reduces the usable magnetic holding force.Matched component dimensions and adjustable mounting permit full pole-face contact.
An incompatible supply voltage can overheat or under-energize the coil.The lock coil is selected for the existing controller output and wiring system.
A bulky latch conflicts with the narrow cleanroom door frame.Low-profile surface-mounted magnet and plate components use limited header space.
Exposed cable entry is vulnerable during cleaning and maintenance.A dedicated gland protects the lead where it exits the magnet housing.
تطبيقات نموذجية
Personnel air shower door interlocksMaterial air shower access doorsCleanroom vestibule sequencingAir shower lock replacement and refurbishment
المعلمات الفنية
Typical construction and dimensional ranges for compact air shower electromagnetic lock sets are shown below.
| المواد الأساسية | Laminated electromagnetic steel core with copper coil and steel armature plate |
|---|---|
| سمك اللوحة | 25-50 mm nominal magnet-body depth |
| العرض الفعال | 35-70 mm nominal magnet-body face width |
| الحد الأقصى الطول | Up to 320 mm overall magnet-body length |
| الصلب يواجه سمك | 8-15 mm nominal armature-plate thickness |
| الكثافة الأساسية | 7800-7850 kg/m³ for magnetic steel components |
| الموصلية الحرارية | 45-60 W/(m·K) for steel core and armature |
| إنهاء السطح | Satin silver anodized housing with black magnetic pole surround |
| نوع المشترك | Paired surface-mounted magnet and armature with gland-protected wired connection |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Matched DC supply voltageAlternative body lengthsDoor-status signal optionCustom mounting brackets and lead length
Planning a Air Shower Magnetic Lock specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
