Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Cleanroom Equipment Spare Parts
Air Shower Lock Magnetik Air Shower Lock Magnetik Air Shower Lock Magnetik
A compact electromagnetic lock and armature set that holds an air shower door closed during controlled entry and purge sequences.
- Fail-Safe Magnetic Holding
- Pelat Armature yang Cocok
- Compact Surface Mounting
- Interlock-Control Compatible
Perkenalan produk
The air shower magnetic lock uses an energized electromagnetic body and a matching armature plate to hold a swing door during the controlled shower sequence. With no projecting latch bolt, the paired surfaces release cleanly when power is removed and suit frequent automated cycling. The aluminum housings provide a compact, corrosion-resistant assembly for mounting above or beside the door. Replacement work should match holding requirement, supply voltage, available mounting space, cable routing and controller logic.
Fitur utama:
Fail-safe operation releases the door when lock power is removed.
Compact rectangular components fit narrow air shower headers and frames.
A protected lead connection supports integration with the door-interlock controller.
Kekhawatiran produk pelanggan
Stable magnetic holding depends on correct plate alignment, electrical compatibility and full face contact when the door closes.
A misaligned armature plate reduces the usable magnetic holding force.Matched component dimensions and adjustable mounting permit full pole-face contact.
An incompatible supply voltage can overheat or under-energize the coil.The lock coil is selected for the existing controller output and wiring system.
A bulky latch conflicts with the narrow cleanroom door frame.Low-profile surface-mounted magnet and plate components use limited header space.
Exposed cable entry is vulnerable during cleaning and maintenance.A dedicated gland protects the lead where it exits the magnet housing.
Aplikasi yang Tipis
Personnel air shower door interlocksMaterial air shower access doorsCleanroom vestibule sequencingAir shower lock replacement and refurbishment
Parameter teknis
Typical construction and dimensional ranges for compact air shower electromagnetic lock sets are shown below.
| Bahan inti | Laminated electromagnetic steel core with copper coil and steel armature plate |
|---|---|
| Ketebalan Panel (Panel Thickness) | 25-50 mm nominal magnet-body depth |
| Efektif lebar | 35-70 mm nominal magnet-body face width |
| Panjang maksimum | Up to 320 mm overall magnet-body length |
| Baja menghadap ketebalan | 8-15 mm nominal armature-plate thickness |
| Kepadatan inti (core density) | 7800-7850 kg/m³ for magnetic steel components |
| Konduktivitas Termal (Thermal Conductivity) | 45-60 W/(m·K) for steel core and armature |
| Permukaan selesai | Satin silver anodized housing with black magnetic pole surround |
| Jenis Bersama | Paired surface-mounted magnet and armature with gland-protected wired connection |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
Matched DC supply voltageAlternative body lengthsDoor-status signal optionCustom mounting brackets and lead length
Planning a Air Shower Magnetic Lock specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
