İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Ekipmanları Yedek Parçaları
Hava Duş Manyetik Kilit
A compact electromagnetic lock and armature set that holds an air shower door closed during controlled entry and purge sequences.
- Fail-Safe Magnetic Holding
- Matched Armature Plate
- Compact Surface Mounting
- Interlock-Control Compatible
Ürün tanıtımı
The air shower magnetic lock uses an energized electromagnetic body and a matching armature plate to hold a swing door during the controlled shower sequence. With no projecting latch bolt, the paired surfaces release cleanly when power is removed and suit frequent automated cycling. The aluminum housings provide a compact, corrosion-resistant assembly for mounting above or beside the door. Replacement work should match holding requirement, supply voltage, available mounting space, cable routing and controller logic.
Ana Özellikler
Fail-safe operation releases the door when lock power is removed.
Compact rectangular components fit narrow air shower headers and frames.
A protected lead connection supports integration with the door-interlock controller.
Müşteri Ürün Sorunları
Stable magnetic holding depends on correct plate alignment, electrical compatibility and full face contact when the door closes.
A misaligned armature plate reduces the usable magnetic holding force.Matched component dimensions and adjustable mounting permit full pole-face contact.
An incompatible supply voltage can overheat or under-energize the coil.The lock coil is selected for the existing controller output and wiring system.
A bulky latch conflicts with the narrow cleanroom door frame.Low-profile surface-mounted magnet and plate components use limited header space.
Exposed cable entry is vulnerable during cleaning and maintenance.A dedicated gland protects the lead where it exits the magnet housing.
Tipik uygulamalar
Personnel air shower door interlocksMaterial air shower access doorsCleanroom vestibule sequencingAir shower lock replacement and refurbishment
Teknik parametreler
Typical construction and dimensional ranges for compact air shower electromagnetic lock sets are shown below.
| Temel malzemeler | Laminated electromagnetic steel core with copper coil and steel armature plate |
|---|---|
| Panel kalınlığı | 25-50 mm nominal magnet-body depth |
| Effective Width (Etkili Genişlik) | 35-70 mm nominal magnet-body face width |
| Maksimum uzunluk | Up to 320 mm overall magnet-body length |
| Çelik yüz yüze kalınlığı | 8-15 mm nominal armature-plate thickness |
| Core Density (Çekirdek Yoğunluğu) | 7800-7850 kg/m³ for magnetic steel components |
| Termal İletkenlik | 45-60 W/(m·K) for steel core and armature |
| Yüzey bitirme | Satin silver anodized housing with black magnetic pole surround |
| Ortak tip | Paired surface-mounted magnet and armature with gland-protected wired connection |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Matched DC supply voltageAlternative body lengthsDoor-status signal optionCustom mounting brackets and lead length
Planning a Air Shower Magnetic Lock specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
