Three-quarter view of an air shower electromagnetic lock and armature set

クリーンルーム機器のスペアパーツ

Air シャワーの磁気ロック

A compact electromagnetic lock and armature set that holds an air shower door closed during controlled entry and purge sequences.

Fail-Safe Magnetic Holding
マッチしたアーマチュアプレート
コンパクトな表面取り付け
Interlock-Control Compatible

見積もりリクエスト製品案内

商品紹介

The air shower magnetic lock uses an energized electromagnetic body and a matching armature plate to hold a swing door during the controlled shower sequence. With no projecting latch bolt, the paired surfaces release cleanly when power is removed and suit frequent automated cycling. The aluminum housings provide a compact, corrosion-resistant assembly for mounting above or beside the door. Replacement work should match holding requirement, supply voltage, available mounting space, cable routing and controller logic.

主要な特徴

The paired magnet and armature provide contact holding without a mechanical latch tongue.

Fail-safe operation releases the door when lock power is removed.

Compact rectangular components fit narrow air shower headers and frames.

A protected lead connection supports integration with the door-interlock controller.

お客様の製品に関する懸念事項

Stable magnetic holding depends on correct plate alignment, electrical compatibility and full face contact when the door closes.

A misaligned armature plate reduces the usable magnetic holding force.Matched component dimensions and adjustable mounting permit full pole-face contact.

An incompatible supply voltage can overheat or under-energize the coil.The lock coil is selected for the existing controller output and wiring system.

A bulky latch conflicts with the narrow cleanroom door frame.Low-profile surface-mounted magnet and plate components use limited header space.

Exposed cable entry is vulnerable during cleaning and maintenance.A dedicated gland protects the lead where it exits the magnet housing.

典型的な用途

Personnel air shower door interlocks材料空気シャワーアクセスドアCleanroom vestibule sequencingAir shower lock replacement and refurbishment

技術的なパラメータ

Typical construction and dimensional ranges for compact air shower electromagnetic lock sets are shown below.

コア材料	Laminated electromagnetic steel core with copper coil and steel armature plate
パネルの厚さ	25-50 mm nominal magnet-body depth
有効幅	35-70 mm nominal magnet-body face width
最大長さ	Up to 320 mm overall magnet-body length
鋼鉄の厚さを直面する	8-15 mm nominal armature-plate thickness
コア密度	7800-7850 kg/m³ for magnetic steel components
熱伝導率	45-60 W/(m·K) for steel core and armature
表面仕上げ	Satin silver anodized housing with black magnetic pole surround
ジョイントタイプ	Paired surface-mounted magnet and armature with gland-protected wired connection
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Matched DC supply voltageAlternative body lengthsDoor-status signal optionCustom mounting brackets and lead length

Planning a Air Shower Magnetic Lock specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する