English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Запчасти для оборудования для чистых помещений
Магнитный замок воздушного душа
A compact electromagnetic lock and armature set that holds an air shower door closed during controlled entry and purge sequences.
- Fail-Safe Magnetic Holding
- Matched Armature Plate
- Compact Surface Mounting
- Interlock-Control Compatible
Введение продукции
The air shower magnetic lock uses an energized electromagnetic body and a matching armature plate to hold a swing door during the controlled shower sequence. With no projecting latch bolt, the paired surfaces release cleanly when power is removed and suit frequent automated cycling. The aluminum housings provide a compact, corrosion-resistant assembly for mounting above or beside the door. Replacement work should match holding requirement, supply voltage, available mounting space, cable routing and controller logic.
Основные характеристики
Fail-safe operation releases the door when lock power is removed.
Compact rectangular components fit narrow air shower headers and frames.
A protected lead connection supports integration with the door-interlock controller.
Обеспокоенность клиентов продуктами
Stable magnetic holding depends on correct plate alignment, electrical compatibility and full face contact when the door closes.
A misaligned armature plate reduces the usable magnetic holding force.Matched component dimensions and adjustable mounting permit full pole-face contact.
An incompatible supply voltage can overheat or under-energize the coil.The lock coil is selected for the existing controller output and wiring system.
A bulky latch conflicts with the narrow cleanroom door frame.Low-profile surface-mounted magnet and plate components use limited header space.
Exposed cable entry is vulnerable during cleaning and maintenance.A dedicated gland protects the lead where it exits the magnet housing.
Типичные приложения
Personnel air shower door interlocksMaterial air shower access doorsCleanroom vestibule sequencingAir shower lock replacement and refurbishment
Технические параметры
Typical construction and dimensional ranges for compact air shower electromagnetic lock sets are shown below.
| Основной материал | Laminated electromagnetic steel core with copper coil and steel armature plate |
|---|---|
| Толщина панели | 25-50 mm nominal magnet-body depth |
| эффективная ширина | 35-70 mm nominal magnet-body face width |
| Максимальная длина | Up to 320 mm overall magnet-body length |
| Толщина линий стали | 8-15 mm nominal armature-plate thickness |
| Плотность ядра | 7800-7850 kg/m³ for magnetic steel components |
| Теплопроводимость | 45-60 W/(m·K) for steel core and armature |
| Поверхностная отделка | Satin silver anodized housing with black magnetic pole surround |
| Объединенный тип | Paired surface-mounted magnet and armature with gland-protected wired connection |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Matched DC supply voltageAlternative body lengthsDoor-status signal optionCustom mounting brackets and lead length
Planning a Air Shower Magnetic Lock specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
