Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de sala limpia piezas de repuesto
Bloqueo magnético de ducha de aire
A compact electromagnetic lock and armature set that holds an air shower door closed during controlled entry and purge sequences.
- Fail-Safe Magnetic Holding
- Matched Armature Plate
- Compact Surface Mounting
- Interlock-Control Compatible
Introducción del producto
The air shower magnetic lock uses an energized electromagnetic body and a matching armature plate to hold a swing door during the controlled shower sequence. With no projecting latch bolt, the paired surfaces release cleanly when power is removed and suit frequent automated cycling. The aluminum housings provide a compact, corrosion-resistant assembly for mounting above or beside the door. Replacement work should match holding requirement, supply voltage, available mounting space, cable routing and controller logic.
Características clave
Fail-safe operation releases the door when lock power is removed.
Compact rectangular components fit narrow air shower headers and frames.
A protected lead connection supports integration with the door-interlock controller.
Preocupaciones del producto del cliente
Stable magnetic holding depends on correct plate alignment, electrical compatibility and full face contact when the door closes.
A misaligned armature plate reduces the usable magnetic holding force.Matched component dimensions and adjustable mounting permit full pole-face contact.
An incompatible supply voltage can overheat or under-energize the coil.The lock coil is selected for the existing controller output and wiring system.
A bulky latch conflicts with the narrow cleanroom door frame.Low-profile surface-mounted magnet and plate components use limited header space.
Exposed cable entry is vulnerable during cleaning and maintenance.A dedicated gland protects the lead where it exits the magnet housing.
Aplicaciones típicas
Personnel air shower door interlocksMaterial air shower access doorsCleanroom vestibule sequencingAir shower lock replacement and refurbishment
Parámetros técnicos
Typical construction and dimensional ranges for compact air shower electromagnetic lock sets are shown below.
| Materiales Core | Laminated electromagnetic steel core with copper coil and steel armature plate |
|---|---|
| Panel de espesor | 25-50 mm nominal magnet-body depth |
| Ancho efectivo | 35-70 mm nominal magnet-body face width |
| Longitud máxima | Up to 320 mm overall magnet-body length |
| Acero frente a espesor | 8-15 mm nominal armature-plate thickness |
| Densidad Core | 7800-7850 kg/m³ for magnetic steel components |
| Conductividad térmica | 45-60 W/(m·K) for steel core and armature |
| Superficie acabada | Satin silver anodized housing with black magnetic pole surround |
| Tipo conjunto | Paired surface-mounted magnet and armature with gland-protected wired connection |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Matched DC supply voltageAlternative body lengthsDoor-status signal optionCustom mounting brackets and lead length
Planning a Air Shower Magnetic Lock specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
