İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Personel ve Malzeme Dekontaminasyon Ekipmanları
personel sisli dekontaminasyon duş
A controlled exit chamber that applies fine water droplets to bind loose powder on protective garments before de-gowning.
- Fine-Droplet Suit Coverage
- Interlocked Door Sequence
- Drainable Stainless Interior
- Programmable Misting Cycle
Ürün tanıtımı
This walk-through misting shower places a distributed nozzle array around an operator leaving a powder-handling suite. Fine treated-water droplets wet the outer garment surface with limited runoff, while a sloped floor collects the resulting liquid. Smooth stainless internal surfaces, coved corners and a sealed two-door route support cleaning between shifts.
Ana Özellikler
A controller sequences entry lock, misting, drip delay and exit release.
Pressure and water-supply monitoring can inhibit a cycle when utility conditions are unsuitable.
A non-slip floor pan directs liquid to a trapped drain connection.
Visible cycle indicators guide the operator through rotation and completion.
Müşteri Ürün Sorunları
The chamber must wet loose residue consistently while keeping water use and carryover manageable.
Dry powder can become airborne during suit removal.Fine droplets bind loose residue to the outer garment before de-gowning.
Arms and boots receive less water than the front of the suit.Multi-level nozzles and an operator rotation prompt extend coverage around the wearer.
Residual water causes slips and delays the next user.A graded non-slip floor and drain-down pause remove runoff before door release.
Both doors are opened during a decontamination cycle.Electrical interlocking keeps the opposite doorway secured until the cycle ends.
Tipik uygulamalar
High-potency pharmaceutical exitsAPI powder productionContainment laboratory de-gowningBattery-powder handling rooms
Teknik parametreler
Typical hygienic enclosure ranges for a personnel misting shower are listed below.
| Temel malzemeler | PIR-insulated SUS 304 or SUS 316L chamber with treated-water manifolds and atomising nozzles |
|---|---|
| Panel kalınlığı | 50-75 mm insulated wall and ceiling panels |
| Effective Width (Etkili Genişlik) | 900-1200 mm clear internal width |
| Maksimum uzunluk | Up to 1800 mm chamber length |
| Çelik yüz yüze kalınlığı | 1.0-1.5 mm stainless-steel internal facing |
| Core Density (Çekirdek Yoğunluğu) | 40-45 kg/m³ closed-cell PIR insulation |
| Termal İletkenlik | 0.021-0.026 W/(m·K) for the insulated enclosure core |
| Yüzey bitirme | Brushed stainless steel with welded coved corners and a non-slip drain floor |
| Ortak tip | Liquid-tight flush seams with gasketed interlocked doors and sanitary welded pipe connections |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Water-quality monitoringAir-assisted atomising nozzlesEmergency rinse functionTwo-person chamber arrangement
Planning a Personnel Misting Decontamination Shower specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
