Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de descontaminación de personal y material
Ducha de descontaminación de personal
A controlled exit chamber that applies fine water droplets to bind loose powder on protective garments before de-gowning.
- Fine-Droplet Suit Coverage
- Interlocked Door Sequence
- Drainable Stainless Interior
- Programmable Misting Cycle
Introducción del producto
This walk-through misting shower places a distributed nozzle array around an operator leaving a powder-handling suite. Fine treated-water droplets wet the outer garment surface with limited runoff, while a sloped floor collects the resulting liquid. Smooth stainless internal surfaces, coved corners and a sealed two-door route support cleaning between shifts.
Características clave
A controller sequences entry lock, misting, drip delay and exit release.
Pressure and water-supply monitoring can inhibit a cycle when utility conditions are unsuitable.
A non-slip floor pan directs liquid to a trapped drain connection.
Visible cycle indicators guide the operator through rotation and completion.
Preocupaciones del producto del cliente
The chamber must wet loose residue consistently while keeping water use and carryover manageable.
Dry powder can become airborne during suit removal.Fine droplets bind loose residue to the outer garment before de-gowning.
Arms and boots receive less water than the front of the suit.Multi-level nozzles and an operator rotation prompt extend coverage around the wearer.
Residual water causes slips and delays the next user.A graded non-slip floor and drain-down pause remove runoff before door release.
Both doors are opened during a decontamination cycle.Electrical interlocking keeps the opposite doorway secured until the cycle ends.
Aplicaciones típicas
High-potency pharmaceutical exitsAPI powder productionContainment laboratory de-gowningBattery-powder handling rooms
Parámetros técnicos
Typical hygienic enclosure ranges for a personnel misting shower are listed below.
| Materiales Core | PIR-insulated SUS 304 or SUS 316L chamber with treated-water manifolds and atomising nozzles |
|---|---|
| Panel de espesor | 50-75 mm insulated wall and ceiling panels |
| Ancho efectivo | 900-1200 mm clear internal width |
| Longitud máxima | Up to 1800 mm chamber length |
| Acero frente a espesor | 1.0-1.5 mm stainless-steel internal facing |
| Densidad Core | 40-45 kg/m³ closed-cell PIR insulation |
| Conductividad térmica | 0.021-0.026 W/(m·K) for the insulated enclosure core |
| Superficie acabada | Brushed stainless steel with welded coved corners and a non-slip drain floor |
| Tipo conjunto | Liquid-tight flush seams with gasketed interlocked doors and sanitary welded pipe connections |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Water-quality monitoringAir-assisted atomising nozzlesEmergency rinse functionTwo-person chamber arrangement
Planning a Personnel Misting Decontamination Shower specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
