Three-quarter view of a personnel misting decontamination shower with stainless enclosure

Peralatan Dekontaminasi Personil dan Bahan

Personil Misting Dekontaminasi Shower

A controlled exit chamber that applies fine water droplets to bind loose powder on protective garments before de-gowning.

Fine-Droplet Suit Coverage
Interlocked Door Sequence
Drainable Stainless Interior
Programmable Misting Cycle

Permintaan untuk kutipan Browse Produk

Perkenalan produk

This walk-through misting shower places a distributed nozzle array around an operator leaving a powder-handling suite. Fine treated-water droplets wet the outer garment surface with limited runoff, while a sloped floor collects the resulting liquid. Smooth stainless internal surfaces, coved corners and a sealed two-door route support cleaning between shifts.

Fitur utama:

Overhead and side nozzles address the hood, torso, cuffs and lower-leg zones.

A controller sequences entry lock, misting, drip delay and exit release.

Pressure and water-supply monitoring can inhibit a cycle when utility conditions are unsuitable.

A non-slip floor pan directs liquid to a trapped drain connection.

Visible cycle indicators guide the operator through rotation and completion.

Kekhawatiran produk pelanggan

The chamber must wet loose residue consistently while keeping water use and carryover manageable.

Dry powder can become airborne during suit removal.Fine droplets bind loose residue to the outer garment before de-gowning.

Arms and boots receive less water than the front of the suit.Multi-level nozzles and an operator rotation prompt extend coverage around the wearer.

Residual water causes slips and delays the next user.A graded non-slip floor and drain-down pause remove runoff before door release.

Both doors are opened during a decontamination cycle.Electrical interlocking keeps the opposite doorway secured until the cycle ends.

Aplikasi yang Tipis

High-potency pharmaceutical exitsAPI powder productionContainment laboratory de-gowningBattery-powder handling rooms

Parameter teknis

Typical hygienic enclosure ranges for a personnel misting shower are listed below.

Bahan inti	PIR-insulated SUS 304 or SUS 316L chamber with treated-water manifolds and atomising nozzles
Ketebalan Panel (Panel Thickness)	50-75 mm insulated wall and ceiling panels
Efektif lebar	900-1200 mm clear internal width
Panjang maksimum	Up to 1800 mm chamber length
Baja menghadap ketebalan	1.0-1.5 mm stainless-steel internal facing
Kepadatan inti (core density)	40-45 kg/m³ closed-cell PIR insulation
Konduktivitas Termal (Thermal Conductivity)	0.021-0.026 W/(m·K) for the insulated enclosure core
Permukaan selesai	Brushed stainless steel with welded coved corners and a non-slip drain floor
Jenis Bersama	Liquid-tight flush seams with gasketed interlocked doors and sanitary welded pipe connections
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Water-quality monitoringAir-assisted atomising nozzlesEmergency rinse functionTwo-person chamber arrangement

Planning a Personnel Misting Decontamination Shower specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami