Three-quarter view of a personnel misting decontamination shower with stainless enclosure

Peralatan Dekontaminasi Kakitangan dan Bahan

Personel Misting Dekontaminasi Mandi

A controlled exit chamber that applies fine water droplets to bind loose powder on protective garments before de-gowning.

Fine-Droplet Suit Coverage
Interlocked Door Sequence
Drainable Stainless Interior
Programmable Misting Cycle

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

This walk-through misting shower places a distributed nozzle array around an operator leaving a powder-handling suite. Fine treated-water droplets wet the outer garment surface with limited runoff, while a sloped floor collects the resulting liquid. Smooth stainless internal surfaces, coved corners and a sealed two-door route support cleaning between shifts.

Ciri-ciri Utama

Overhead and side nozzles address the hood, torso, cuffs and lower-leg zones.

A controller sequences entry lock, misting, drip delay and exit release.

Pressure and water-supply monitoring can inhibit a cycle when utility conditions are unsuitable.

A non-slip floor pan directs liquid to a trapped drain connection.

Visible cycle indicators guide the operator through rotation and completion.

Kebimbangan Produk Pelanggan

The chamber must wet loose residue consistently while keeping water use and carryover manageable.

Dry powder can become airborne during suit removal.Fine droplets bind loose residue to the outer garment before de-gowning.

Arms and boots receive less water than the front of the suit.Multi-level nozzles and an operator rotation prompt extend coverage around the wearer.

Residual water causes slips and delays the next user.A graded non-slip floor and drain-down pause remove runoff before door release.

Both doors are opened during a decontamination cycle.Electrical interlocking keeps the opposite doorway secured until the cycle ends.

Permohonan yang biasa

High-potency pharmaceutical exitsAPI powder productionContainment laboratory de-gowningBattery-powder handling rooms

Parameter teknikal

Typical hygienic enclosure ranges for a personnel misting shower are listed below.

Bahan Teras	PIR-insulated SUS 304 or SUS 316L chamber with treated-water manifolds and atomising nozzles
Ketebalan Panel	50-75 mm insulated wall and ceiling panels
Lebar berkesan	900-1200 mm clear internal width
Panjang maksimum	Up to 1800 mm chamber length
Keluli Menghadapi Ketebalan	1.0-1.5 mm stainless-steel internal facing
Ketumpatan teras	40-45 kg/m³ closed-cell PIR insulation
Kekonduksian Terma	0.021-0.026 W/(m·K) for the insulated enclosure core
Kemasan permukaan	Brushed stainless steel with welded coved corners and a non-slip drain floor
Jenis Bersatu	Liquid-tight flush seams with gasketed interlocked doors and sanitary welded pipe connections
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Water-quality monitoringAir-assisted atomising nozzlesEmergency rinse functionTwo-person chamber arrangement

Planning a Personnel Misting Decontamination Shower specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami