Three-quarter view of a personnel misting decontamination shower with stainless enclosure

인력 및 재료 오염 제거 장비

인원 미스트 디오염 샤워기

A controlled exit chamber that applies fine water droplets to bind loose powder on protective garments before de-gowning.

Fine-Droplet Suit Coverage
Interlocked Door Sequence
Drainable Stainless Interior
Programmable Misting Cycle

견적 요청 제품 찾아보기

상품 소개

This walk-through misting shower places a distributed nozzle array around an operator leaving a powder-handling suite. Fine treated-water droplets wet the outer garment surface with limited runoff, while a sloped floor collects the resulting liquid. Smooth stainless internal surfaces, coved corners and a sealed two-door route support cleaning between shifts.

주요 기능

Overhead and side nozzles address the hood, torso, cuffs and lower-leg zones.

A controller sequences entry lock, misting, drip delay and exit release.

Pressure and water-supply monitoring can inhibit a cycle when utility conditions are unsuitable.

A non-slip floor pan directs liquid to a trapped drain connection.

Visible cycle indicators guide the operator through rotation and completion.

고객 제품 관심사

The chamber must wet loose residue consistently while keeping water use and carryover manageable.

Dry powder can become airborne during suit removal.Fine droplets bind loose residue to the outer garment before de-gowning.

Arms and boots receive less water than the front of the suit.Multi-level nozzles and an operator rotation prompt extend coverage around the wearer.

Residual water causes slips and delays the next user.A graded non-slip floor and drain-down pause remove runoff before door release.

Both doors are opened during a decontamination cycle.Electrical interlocking keeps the opposite doorway secured until the cycle ends.

일반적인 응용 프로그램

High-potency pharmaceutical exitsAPI powder productionContainment laboratory de-gowningBattery-powder handling rooms

기술 매개변수

Typical hygienic enclosure ranges for a personnel misting shower are listed below.

핵심 재료	PIR-insulated SUS 304 or SUS 316L chamber with treated-water manifolds and atomising nozzles
패널 두께	50-75 mm insulated wall and ceiling panels
유효 폭	900-1200 mm clear internal width
최대 길이	Up to 1800 mm chamber length
강철 면면 두께	1.0-1.5 mm stainless-steel internal facing
코어 밀도	40-45 kg/m³ closed-cell PIR insulation
열전도도 (Thermal Conductivity)	0.021-0.026 W/(m·K) for the insulated enclosure core
표면 마무리	Brushed stainless steel with welded coved corners and a non-slip drain floor
접합 유형	Liquid-tight flush seams with gasketed interlocked doors and sanitary welded pipe connections
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Water-quality monitoringAir-assisted atomising nozzlesEmergency rinse functionTwo-person chamber arrangement

Planning a Personnel Misting Decontamination Shower specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.