Three-quarter view of a personnel misting decontamination shower with stainless enclosure

人員 · 材料の汚染除去設備

Personnel 霧の除染のシャワー

A controlled exit chamber that applies fine water droplets to bind loose powder on protective garments before de-gowning.

Fine-Droplet Suit Coverage
Interlocked Door Sequence
Drainable Stainless Interior
Programmable Misting Cycle

見積もりリクエスト製品案内

商品紹介

This walk-through misting shower places a distributed nozzle array around an operator leaving a powder-handling suite. Fine treated-water droplets wet the outer garment surface with limited runoff, while a sloped floor collects the resulting liquid. Smooth stainless internal surfaces, coved corners and a sealed two-door route support cleaning between shifts.

主要な特徴

Overhead and side nozzles address the hood, torso, cuffs and lower-leg zones.

A controller sequences entry lock, misting, drip delay and exit release.

Pressure and water-supply monitoring can inhibit a cycle when utility conditions are unsuitable.

A non-slip floor pan directs liquid to a trapped drain connection.

Visible cycle indicators guide the operator through rotation and completion.

お客様の製品に関する懸念事項

The chamber must wet loose residue consistently while keeping water use and carryover manageable.

Dry powder can become airborne during suit removal.Fine droplets bind loose residue to the outer garment before de-gowning.

Arms and boots receive less water than the front of the suit.Multi-level nozzles and an operator rotation prompt extend coverage around the wearer.

Residual water causes slips and delays the next user.A graded non-slip floor and drain-down pause remove runoff before door release.

Both doors are opened during a decontamination cycle.Electrical interlocking keeps the opposite doorway secured until the cycle ends.

典型的な用途

High-potency pharmaceutical exitsAPI powder productionContainment laboratory de-gowningBattery-powder handling rooms

技術的なパラメータ

Typical hygienic enclosure ranges for a personnel misting shower are listed below.

コア材料	PIR-insulated SUS 304 or SUS 316L chamber with treated-water manifolds and atomising nozzles
パネルの厚さ	50-75 mm insulated wall and ceiling panels
有効幅	900-1200 mm clear internal width
最大長さ	Up to 1800 mm chamber length
鋼鉄の厚さを直面する	1.0-1.5 mm stainless-steel internal facing
コア密度	40-45 kg/m³ closed-cell PIR insulation
熱伝導率	0.021-0.026 W/(m·K) for the insulated enclosure core
表面仕上げ	Brushed stainless steel with welded coved corners and a non-slip drain floor
ジョイントタイプ	Liquid-tight flush seams with gasketed interlocked doors and sanitary welded pipe connections
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Water-quality monitoringAir-assisted atomising nozzlesEmergency rinse functionTwo-person chamber arrangement

Planning a Personnel Misting Decontamination Shower specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する