İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Endüstriye Özel Temiz Oda Ekipmanları
böcek ışık tuzağı
A wall-mounted stainless UV-A insect monitor that attracts flying insects to a concealed, replaceable adhesive capture board without an exposed high-voltage grid.
- Shielded UV-A Lamps
- Adhesive Capture Board
- Stainless Housing
- Tool-Free Service Panel
Ürün tanıtımı
The insect light trap uses shielded UV-A lamps behind a louvred stainless front to attract flying insects in food handling and clean support areas. Insects are retained on a removable adhesive board rather than fragmented by an electric grid. A hinged service cover gives staff direct access to the lamps and board while the enclosed housing helps keep captured material out of view from normal working angles.
Ana Özellikler
A full-width adhesive board retains insects intact for cleaner disposal and routine monitoring.
The hinged front opens without removing the wall-mounted backplate from service.
Smooth stainless exterior surfaces tolerate frequent wipe-down in hygiene-sensitive areas.
Müşteri Ürün Sorunları
Flying-insect monitoring must be effective without scattering fragments or creating difficult-to-clean electrical hardware near exposed processes.
Electric-grid units can fragment insects near sensitive products.A concealed adhesive board captures insects intact without an exposed killing grid.
Unshielded lamps remain visible from food preparation lines.Angled stainless louvres direct UV-A output while screening the capture compartment.
Board and lamp changes can interrupt sanitation routines.A front-hinged service panel provides direct access while the backplate stays installed.
Painted or plastic housings can become damaged by repeated cleaning.A brushed stainless housing provides a smooth durable external surface.
Tipik uygulamalar
Food production entrances and hygiene lobbiesPackaging and ingredient preparation roomsCommercial kitchens and bakeriesPharmaceutical support and warehouse zones
Teknik parametreler
Common configurable construction values for a hygienic wall-mounted adhesive insect light trap are listed below.
| Temel malzemeler | 304 stainless steel housing with shatter-resistant UV-A lamps and removable adhesive board |
|---|---|
| Panel kalınlığı | 70-140 mm assembled housing depth |
| Effective Width (Etkili Genişlik) | 450-700 mm illuminated capture width |
| Maksimum uzunluk | Up to 900 mm overall housing length |
| Çelik yüz yüze kalınlığı | 0.8-1.2 mm brushed stainless steel casing |
| Core Density (Çekirdek Yoğunluğu) | 7900-8000 kg/m³ for austenitic stainless steel housing components |
| Termal İletkenlik | 14-16 W/(m·K) for austenitic stainless steel |
| Yüzey bitirme | Brushed stainless exterior with smooth folded edges and removable internal capture board |
| Ortak tip | Hinged louvred front on a wall-mounted backplate with captive fastener and cable-entry grommet |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Two-lamp or four-lamp configuration15 W or 20 W shatter-resistant UV-A lampsWhite coated or 304 stainless housingWall, ceiling-suspended or freestanding mounting kit
Planning a Insect Light Trap specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
