Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de sala limpia específicos de la industria
Trampa de luz de insectos
A wall-mounted stainless UV-A insect monitor that attracts flying insects to a concealed, replaceable adhesive capture board without an exposed high-voltage grid.
- Shielded UV-A Lamps
- Adhesive Capture Board
- Stainless Housing
- Tool-Free Service Panel
Introducción del producto
The insect light trap uses shielded UV-A lamps behind a louvred stainless front to attract flying insects in food handling and clean support areas. Insects are retained on a removable adhesive board rather than fragmented by an electric grid. A hinged service cover gives staff direct access to the lamps and board while the enclosed housing helps keep captured material out of view from normal working angles.
Características clave
A full-width adhesive board retains insects intact for cleaner disposal and routine monitoring.
The hinged front opens without removing the wall-mounted backplate from service.
Smooth stainless exterior surfaces tolerate frequent wipe-down in hygiene-sensitive areas.
Preocupaciones del producto del cliente
Flying-insect monitoring must be effective without scattering fragments or creating difficult-to-clean electrical hardware near exposed processes.
Electric-grid units can fragment insects near sensitive products.A concealed adhesive board captures insects intact without an exposed killing grid.
Unshielded lamps remain visible from food preparation lines.Angled stainless louvres direct UV-A output while screening the capture compartment.
Board and lamp changes can interrupt sanitation routines.A front-hinged service panel provides direct access while the backplate stays installed.
Painted or plastic housings can become damaged by repeated cleaning.A brushed stainless housing provides a smooth durable external surface.
Aplicaciones típicas
Food production entrances and hygiene lobbiesPackaging and ingredient preparation roomsCommercial kitchens and bakeriesPharmaceutical support and warehouse zones
Parámetros técnicos
Common configurable construction values for a hygienic wall-mounted adhesive insect light trap are listed below.
| Materiales Core | 304 stainless steel housing with shatter-resistant UV-A lamps and removable adhesive board |
|---|---|
| Panel de espesor | 70-140 mm assembled housing depth |
| Ancho efectivo | 450-700 mm illuminated capture width |
| Longitud máxima | Up to 900 mm overall housing length |
| Acero frente a espesor | 0.8-1.2 mm brushed stainless steel casing |
| Densidad Core | 7900-8000 kg/m³ for austenitic stainless steel housing components |
| Conductividad térmica | 14-16 W/(m·K) for austenitic stainless steel |
| Superficie acabada | Brushed stainless exterior with smooth folded edges and removable internal capture board |
| Tipo conjunto | Hinged louvred front on a wall-mounted backplate with captive fastener and cable-entry grommet |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Two-lamp or four-lamp configuration15 W or 20 W shatter-resistant UV-A lampsWhite coated or 304 stainless housingWall, ceiling-suspended or freestanding mounting kit
Planning a Insect Light Trap specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
