日本語
ドイツ人。
アラビア語：アラビア語
フランス語で
インドネシア語
日本語で。流れ
韓国語
マレー語
ポルトガル語
ロシア語
スペイン語
タイ語
トルコ語
ベトナム語
商品紹介
The insect light trap uses shielded UV-A lamps behind a louvred stainless front to attract flying insects in food handling and clean support areas. Insects are retained on a removable adhesive board rather than fragmented by an electric grid. A hinged service cover gives staff direct access to the lamps and board while the enclosed housing helps keep captured material out of view from normal working angles.
主要な特徴
A full-width adhesive board retains insects intact for cleaner disposal and routine monitoring.
The hinged front opens without removing the wall-mounted backplate from service.
Smooth stainless exterior surfaces tolerate frequent wipe-down in hygiene-sensitive areas.
お客様の製品に関する懸念事項
Flying-insect monitoring must be effective without scattering fragments or creating difficult-to-clean electrical hardware near exposed processes.
Electric-grid units can fragment insects near sensitive products.A concealed adhesive board captures insects intact without an exposed killing grid.
Unshielded lamps remain visible from food preparation lines.Angled stainless louvres direct UV-A output while screening the capture compartment.
Board and lamp changes can interrupt sanitation routines.A front-hinged service panel provides direct access while the backplate stays installed.
Painted or plastic housings can become damaged by repeated cleaning.A brushed stainless housing provides a smooth durable external surface.
典型的な用途
Food production entrances and hygiene lobbiesPackaging and ingredient preparation roomsCommercial kitchens and bakeriesPharmaceutical support and warehouse zones
技術的なパラメータ
Common configurable construction values for a hygienic wall-mounted adhesive insect light trap are listed below.
| コア材料 | 304 stainless steel housing with shatter-resistant UV-A lamps and removable adhesive board |
|---|---|
| パネルの厚さ | 70-140 mm assembled housing depth |
| 有効幅 | 450-700 mm illuminated capture width |
| 最大長さ | Up to 900 mm overall housing length |
| 鋼鉄の厚さを直面する | 0.8-1.2 mm brushed stainless steel casing |
| コア密度 | 7900-8000 kg/m³ for austenitic stainless steel housing components |
| 熱伝導率 | 14-16 W/(m·K) for austenitic stainless steel |
| 表面仕上げ | Brushed stainless exterior with smooth folded edges and removable internal capture board |
| ジョイントタイプ | Hinged louvred front on a wall-mounted backplate with captive fastener and cable-entry grommet |
| カスタマイズ | 意図したアプリケーションと動作環境に基づいて利用できます。 |
利用可能なオプション
Two-lamp or four-lamp configuration15 W or 20 W shatter-resistant UV-A lampsWhite coated or 304 stainless housingWall, ceiling-suspended or freestanding mounting kit
Planning a Insect Light Trap specification?
寸法、設置条件、性能目標、必要な表面仕上げをお送りください。
