English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Оборудование для чистых помещений
Лампионка для насекомых
A wall-mounted stainless UV-A insect monitor that attracts flying insects to a concealed, replaceable adhesive capture board without an exposed high-voltage grid.
- Shielded UV-A Lamps
- Adhesive Capture Board
- Stainless Housing
- Tool-Free Service Panel
Введение продукции
The insect light trap uses shielded UV-A lamps behind a louvred stainless front to attract flying insects in food handling and clean support areas. Insects are retained on a removable adhesive board rather than fragmented by an electric grid. A hinged service cover gives staff direct access to the lamps and board while the enclosed housing helps keep captured material out of view from normal working angles.
Основные характеристики
A full-width adhesive board retains insects intact for cleaner disposal and routine monitoring.
The hinged front opens without removing the wall-mounted backplate from service.
Smooth stainless exterior surfaces tolerate frequent wipe-down in hygiene-sensitive areas.
Обеспокоенность клиентов продуктами
Flying-insect monitoring must be effective without scattering fragments or creating difficult-to-clean electrical hardware near exposed processes.
Electric-grid units can fragment insects near sensitive products.A concealed adhesive board captures insects intact without an exposed killing grid.
Unshielded lamps remain visible from food preparation lines.Angled stainless louvres direct UV-A output while screening the capture compartment.
Board and lamp changes can interrupt sanitation routines.A front-hinged service panel provides direct access while the backplate stays installed.
Painted or plastic housings can become damaged by repeated cleaning.A brushed stainless housing provides a smooth durable external surface.
Типичные приложения
Food production entrances and hygiene lobbiesPackaging and ingredient preparation roomsCommercial kitchens and bakeriesPharmaceutical support and warehouse zones
Технические параметры
Common configurable construction values for a hygienic wall-mounted adhesive insect light trap are listed below.
| Основной материал | 304 stainless steel housing with shatter-resistant UV-A lamps and removable adhesive board |
|---|---|
| Толщина панели | 70-140 mm assembled housing depth |
| эффективная ширина | 450-700 mm illuminated capture width |
| Максимальная длина | Up to 900 mm overall housing length |
| Толщина линий стали | 0.8-1.2 mm brushed stainless steel casing |
| Плотность ядра | 7900-8000 kg/m³ for austenitic stainless steel housing components |
| Теплопроводимость | 14-16 W/(m·K) for austenitic stainless steel |
| Поверхностная отделка | Brushed stainless exterior with smooth folded edges and removable internal capture board |
| Объединенный тип | Hinged louvred front on a wall-mounted backplate with captive fastener and cable-entry grommet |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Two-lamp or four-lamp configuration15 W or 20 W shatter-resistant UV-A lampsWhite coated or 304 stainless housingWall, ceiling-suspended or freestanding mounting kit
Planning a Insect Light Trap specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
