Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Branchenspezifische Reinraumausrüstung
Insekten-Licht - Fallen
A wall-mounted stainless UV-A insect monitor that attracts flying insects to a concealed, replaceable adhesive capture board without an exposed high-voltage grid.
- Shielded UV-A Lamps
- Adhesive Capture Board
- Stainless Housing
- Tool-Free Service Panel
Produkteinführung
The insect light trap uses shielded UV-A lamps behind a louvred stainless front to attract flying insects in food handling and clean support areas. Insects are retained on a removable adhesive board rather than fragmented by an electric grid. A hinged service cover gives staff direct access to the lamps and board while the enclosed housing helps keep captured material out of view from normal working angles.
Key Features
A full-width adhesive board retains insects intact for cleaner disposal and routine monitoring.
The hinged front opens without removing the wall-mounted backplate from service.
Smooth stainless exterior surfaces tolerate frequent wipe-down in hygiene-sensitive areas.
Kunden Produktbedenken
Flying-insect monitoring must be effective without scattering fragments or creating difficult-to-clean electrical hardware near exposed processes.
Electric-grid units can fragment insects near sensitive products.A concealed adhesive board captures insects intact without an exposed killing grid.
Unshielded lamps remain visible from food preparation lines.Angled stainless louvres direct UV-A output while screening the capture compartment.
Board and lamp changes can interrupt sanitation routines.A front-hinged service panel provides direct access while the backplate stays installed.
Painted or plastic housings can become damaged by repeated cleaning.A brushed stainless housing provides a smooth durable external surface.
Typische Anwendungen
Food production entrances and hygiene lobbiesPackaging and ingredient preparation roomsCommercial kitchens and bakeriesPharmaceutical support and warehouse zones
Technische Parameter
Common configurable construction values for a hygienic wall-mounted adhesive insect light trap are listed below.
| Core Material | 304 stainless steel housing with shatter-resistant UV-A lamps and removable adhesive board |
|---|---|
| Panel Dicke | 70-140 mm assembled housing depth |
| Effektive Breite | 450-700 mm illuminated capture width |
| Maximale Länge | Up to 900 mm overall housing length |
| Stahl facing Dicke | 0.8-1.2 mm brushed stainless steel casing |
| Kerndichte | 7900-8000 kg/m³ for austenitic stainless steel housing components |
| Thermische Leitfähigkeit | 14 - 16 W / (m · K) für austenitischen Edelstahl |
| Oberfläche Finish | Brushed stainless exterior with smooth folded edges and removable internal capture board |
| Gemeinsamer Typ | Hinged louvred front on a wall-mounted backplate with captive fastener and cable-entry grommet |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Two-lamp or four-lamp configuration15 W or 20 W shatter-resistant UV-A lampsWhite coated or 304 stainless housingWall, ceiling-suspended or freestanding mounting kit
Planning a Insect Light Trap specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
