영어
독일어
아랍어
프랑스어
인도네시아어
일본어
한국어현재 Current
말레이어
포르투갈어
러시아어
스페인어
태국어
터키어
베트남어
상품 소개
The insect light trap uses shielded UV-A lamps behind a louvred stainless front to attract flying insects in food handling and clean support areas. Insects are retained on a removable adhesive board rather than fragmented by an electric grid. A hinged service cover gives staff direct access to the lamps and board while the enclosed housing helps keep captured material out of view from normal working angles.
주요 기능
A full-width adhesive board retains insects intact for cleaner disposal and routine monitoring.
The hinged front opens without removing the wall-mounted backplate from service.
Smooth stainless exterior surfaces tolerate frequent wipe-down in hygiene-sensitive areas.
고객 제품 관심사
Flying-insect monitoring must be effective without scattering fragments or creating difficult-to-clean electrical hardware near exposed processes.
Electric-grid units can fragment insects near sensitive products.A concealed adhesive board captures insects intact without an exposed killing grid.
Unshielded lamps remain visible from food preparation lines.Angled stainless louvres direct UV-A output while screening the capture compartment.
Board and lamp changes can interrupt sanitation routines.A front-hinged service panel provides direct access while the backplate stays installed.
Painted or plastic housings can become damaged by repeated cleaning.A brushed stainless housing provides a smooth durable external surface.
일반적인 응용 프로그램
Food production entrances and hygiene lobbiesPackaging and ingredient preparation roomsCommercial kitchens and bakeriesPharmaceutical support and warehouse zones
기술 매개변수
Common configurable construction values for a hygienic wall-mounted adhesive insect light trap are listed below.
| 핵심 재료 | 304 stainless steel housing with shatter-resistant UV-A lamps and removable adhesive board |
|---|---|
| 패널 두께 | 70-140 mm assembled housing depth |
| 유효 폭 | 450-700 mm illuminated capture width |
| 최대 길이 | Up to 900 mm overall housing length |
| 강철 면면 두께 | 0.8-1.2 mm brushed stainless steel casing |
| 코어 밀도 | 7900-8000 kg/m³ for austenitic stainless steel housing components |
| 열전도도 (Thermal Conductivity) | 14 - 16 W / (m · K) 오스테나이트 스테인레스 스틸 |
| 표면 마무리 | Brushed stainless exterior with smooth folded edges and removable internal capture board |
| 접합 유형 | Hinged louvred front on a wall-mounted backplate with captive fastener and cable-entry grommet |
| 사용자 정의 | 의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다. |
사용 가능한 옵션
Two-lamp or four-lamp configuration15 W or 20 W shatter-resistant UV-A lampsWhite coated or 304 stainless housingWall, ceiling-suspended or freestanding mounting kit
Planning a Insect Light Trap specification?
치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.
