Stainless insect light trap complete three-quarter view with louvred UV-A lamp cover

Peralatan Bilik Bersih Spesifik Industri

Perangkap cahaya serangga

A wall-mounted stainless UV-A insect monitor that attracts flying insects to a concealed, replaceable adhesive capture board without an exposed high-voltage grid.

Shielded UV-A Lamps
Adhesive Capture Board
Stainless Housing
Tool-Free Service Panel

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The insect light trap uses shielded UV-A lamps behind a louvred stainless front to attract flying insects in food handling and clean support areas. Insects are retained on a removable adhesive board rather than fragmented by an electric grid. A hinged service cover gives staff direct access to the lamps and board while the enclosed housing helps keep captured material out of view from normal working angles.

Ciri-ciri Utama

Shatter-resistant UV-A lamps are protected behind a stainless louvred cover.

A full-width adhesive board retains insects intact for cleaner disposal and routine monitoring.

The hinged front opens without removing the wall-mounted backplate from service.

Smooth stainless exterior surfaces tolerate frequent wipe-down in hygiene-sensitive areas.

Kebimbangan Produk Pelanggan

Flying-insect monitoring must be effective without scattering fragments or creating difficult-to-clean electrical hardware near exposed processes.

Electric-grid units can fragment insects near sensitive products.A concealed adhesive board captures insects intact without an exposed killing grid.

Unshielded lamps remain visible from food preparation lines.Angled stainless louvres direct UV-A output while screening the capture compartment.

Board and lamp changes can interrupt sanitation routines.A front-hinged service panel provides direct access while the backplate stays installed.

Painted or plastic housings can become damaged by repeated cleaning.A brushed stainless housing provides a smooth durable external surface.

Permohonan yang biasa

Food production entrances and hygiene lobbiesPackaging and ingredient preparation roomsCommercial kitchens and bakeriesPharmaceutical support and warehouse zones

Parameter teknikal

Common configurable construction values for a hygienic wall-mounted adhesive insect light trap are listed below.

Bahan Teras	304 stainless steel housing with shatter-resistant UV-A lamps and removable adhesive board
Ketebalan Panel	70-140 mm assembled housing depth
Lebar berkesan	450-700 mm illuminated capture width
Panjang maksimum	Up to 900 mm overall housing length
Keluli Menghadapi Ketebalan	0.8-1.2 mm brushed stainless steel casing
Ketumpatan teras	7900-8000 kg/m³ for austenitic stainless steel housing components
Kekonduksian Terma	14-16 W / (m · K) untuk keluli tahan karat austenit
Kemasan permukaan	Brushed stainless exterior with smooth folded edges and removable internal capture board
Jenis Bersatu	Hinged louvred front on a wall-mounted backplate with captive fastener and cable-entry grommet
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Two-lamp or four-lamp configuration15 W or 20 W shatter-resistant UV-A lampsWhite coated or 304 stainless housingWall, ceiling-suspended or freestanding mounting kit

Planning a Insect Light Trap specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami