Cleanroom light switch with flush stainless plate and sealed white actuator

Temiz Oda Aydınlatma ve Elektrik Ekipmanları

Temiz Oda Işığı Anahtarı

A low-profile wall switch that combines a wipe-clean actuator with a flush gasketed plate and enclosed wiring box.

Sealed Wipe-Clean Actuator
Flush Stainless Plate
Clear Circuit Identification
Enclosed Rear Terminals

Alıntı isteği Browse ürünleri

Ürün tanıtımı

This switch presents a sealed rocker, membrane key or touch surface within a stainless cleanroom plate. The broad flange closes the wall opening and the rear box contains terminals away from the room cavity. Laser-etched function labels and a small status indicator can be incorporated without applied paper labels or projecting pilot devices.

Ana Özellikler

A membrane or gasketed rocker prevents an open slot around the moving control.

The flush plate aligns with modular wall panels for direct wiping.

Permanent engraving identifies the controlled lighting zone.

An optional indicator shows circuit state without a separate wall penetration.

The enclosed rear mechanism protects terminal screws from cleaning moisture.

Müşteri Ürün Sorunları

A wall switch is touched frequently and must remain readable, sealed and operable with cleanroom gloves.

Narrow rocker gaps accumulate skin oils and disinfectant.A continuous membrane or sealed actuator removes the open perimeter slot.

Printed adhesive labels peel after chemical cleaning.Laser engraving provides permanent circuit identification.

Small switches are difficult to operate through gloves.A broad tactile actuator provides a clear positive response.

Cleaning fluid reaches exposed rear terminals.A sealed rear box and gland enclose the wiring connection.

Tipik uygulamalar

Local cleanroom lighting switchingAirlock local switchingLaboratory task-light circuitsMaintenance override points

Teknik parametreler

Typical configurable construction ranges for a cleanroom light switch are listed below.

Temel malzemeler	Stainless front plate with sealed polymer membrane or rocker, switch mechanism and enclosed steel back box
Panel kalınlığı	1.5-3.0 mm room-side plate thickness
Effective Width (Etkili Genişlik)	86-200 mm front-plate width
Maksimum uzunluk	Up to 260 mm plate height for multi-control layouts
Çelik yüz yüze kalınlığı	1.5-3.0 mm SUS304 or SUS316L front plate
Core Density (Çekirdek Yoğunluğu)	Approximately 7900-8000 kg/m³ for the stainless front plate
Termal İletkenlik	14-16 W/(m·K) for the stainless plate
Yüzey bitirme	Fine-brushed stainless or white coated face with engraved legends and colored indicator
Ortak tip	Flush plate with concealed gasket, sealed actuator and gland-connected rear switch box
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Single or multi-gang controlMembrane, rocker or capacitive touchIlluminated status indicatorMomentary or maintained contact

Planning a Cleanroom Light Switch specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun