Cleanroom light switch with flush stainless plate and sealed white actuator

Cleanroom Lighting dan Peralatan Listrik

Cleanroom Light Switch (Switch Lampu Ruang Bersih)

A low-profile wall switch that combines a wipe-clean actuator with a flush gasketed plate and enclosed wiring box.

Sealed Wipe-Clean Actuator
Flush Stainless Plate
Clear Circuit Identification
Enclosed Rear Terminals

Perkenalan produk

This switch presents a sealed rocker, membrane key or touch surface within a stainless cleanroom plate. The broad flange closes the wall opening and the rear box contains terminals away from the room cavity. Laser-etched function labels and a small status indicator can be incorporated without applied paper labels or projecting pilot devices.

Fitur utama:

A membrane or gasketed rocker prevents an open slot around the moving control.

The flush plate aligns with modular wall panels for direct wiping.

Permanent engraving identifies the controlled lighting zone.

An optional indicator shows circuit state without a separate wall penetration.

The enclosed rear mechanism protects terminal screws from cleaning moisture.

Kekhawatiran produk pelanggan

A wall switch is touched frequently and must remain readable, sealed and operable with cleanroom gloves.

Narrow rocker gaps accumulate skin oils and disinfectant.A continuous membrane or sealed actuator removes the open perimeter slot.

Printed adhesive labels peel after chemical cleaning.Laser engraving provides permanent circuit identification.

Small switches are difficult to operate through gloves.A broad tactile actuator provides a clear positive response.

Cleaning fluid reaches exposed rear terminals.A sealed rear box and gland enclose the wiring connection.

Aplikasi yang Tipis

Local cleanroom lighting switchingAirlock local switchingLaboratory task-light circuitsMaintenance override points

Parameter teknis

Typical configurable construction ranges for a cleanroom light switch are listed below.

Bahan inti	Stainless front plate with sealed polymer membrane or rocker, switch mechanism and enclosed steel back box
Ketebalan Panel (Panel Thickness)	1.5-3.0 mm room-side plate thickness
Efektif lebar	86-200 mm front-plate width
Panjang maksimum	Up to 260 mm plate height for multi-control layouts
Baja menghadap ketebalan	1.5-3.0 mm SUS304 or SUS316L front plate
Kepadatan inti (core density)	Approximately 7900-8000 kg/m³ for the stainless front plate
Konduktivitas Termal (Thermal Conductivity)	14-16 W/(m·K) for the stainless plate
Permukaan selesai	Fine-brushed stainless or white coated face with engraved legends and colored indicator
Jenis Bersama	Flush plate with concealed gasket, sealed actuator and gland-connected rear switch box
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Single or multi-gang controlMembrane, rocker or capacitive touchIlluminated status indicatorMomentary or maintained contact

Planning a Cleanroom Light Switch specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami