Cleanroom light switch with flush stainless plate and sealed white actuator

클린룸 조명 및 전기 장비

클린룸 조명 스위치

A low-profile wall switch that combines a wipe-clean actuator with a flush gasketed plate and enclosed wiring box.

Sealed Wipe-Clean Actuator
Flush Stainless Plate
Clear Circuit Identification
Enclosed Rear Terminals

견적 요청 제품 찾아보기

상품 소개

This switch presents a sealed rocker, membrane key or touch surface within a stainless cleanroom plate. The broad flange closes the wall opening and the rear box contains terminals away from the room cavity. Laser-etched function labels and a small status indicator can be incorporated without applied paper labels or projecting pilot devices.

주요 기능

A membrane or gasketed rocker prevents an open slot around the moving control.

The flush plate aligns with modular wall panels for direct wiping.

Permanent engraving identifies the controlled lighting zone.

An optional indicator shows circuit state without a separate wall penetration.

The enclosed rear mechanism protects terminal screws from cleaning moisture.

고객 제품 관심사

A wall switch is touched frequently and must remain readable, sealed and operable with cleanroom gloves.

Narrow rocker gaps accumulate skin oils and disinfectant.A continuous membrane or sealed actuator removes the open perimeter slot.

Printed adhesive labels peel after chemical cleaning.Laser engraving provides permanent circuit identification.

Small switches are difficult to operate through gloves.A broad tactile actuator provides a clear positive response.

Cleaning fluid reaches exposed rear terminals.A sealed rear box and gland enclose the wiring connection.

일반적인 응용 프로그램

Local cleanroom lighting switchingAirlock local switchingLaboratory task-light circuitsMaintenance override points

기술 매개변수

Typical configurable construction ranges for a cleanroom light switch are listed below.

핵심 재료	Stainless front plate with sealed polymer membrane or rocker, switch mechanism and enclosed steel back box
패널 두께	1.5-3.0 mm room-side plate thickness
유효 폭	86-200 mm front-plate width
최대 길이	Up to 260 mm plate height for multi-control layouts
강철 면면 두께	1.5-3.0 mm SUS304 or SUS316L front plate
코어 밀도	Approximately 7900-8000 kg/m³ for the stainless front plate
열전도도 (Thermal Conductivity)	14-16 W/(m·K) for the stainless plate
표면 마무리	Fine-brushed stainless or white coated face with engraved legends and colored indicator
접합 유형	Flush plate with concealed gasket, sealed actuator and gland-connected rear switch box
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Single or multi-gang controlMembrane, rocker or capacitive touchIlluminated status indicatorMomentary or maintained contact

Planning a Cleanroom Light Switch specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.